Hoshizaki DCM-300BAH(-OS) instruction manual III. Cleaning and Maintenance

Page 18

III. Cleaning and Maintenance

This icemaker must be cleaned and maintained in accordance with the instruction manual and labels provided with the icemaker. Consult with your local distributor about cleaning and maintenance service. To obtain the name and phone number of your local distributor, visit www.hoshizaki.com or call Hoshizaki Technical Support at 18002331940 in the USA.

WARNING

1.Only qualified service technicians should service this icemaker.

2.CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any cleaning or maintenance is done to the unit. Make sure that none have fallen into the storage bin.

3.The storage bin is for ice use only. Do not store anything else in the storage bin.

Reservoir

Power Switch

Float Switch

Assembly

Evaporator Assembly

Storage Bin Cover

CONTROL

4A1038-014

 

ICE

 

OFF

DISPENSE MODE

 

PORTION

DRAIN

CONTINUOUS

 

Extruding Head Spout A

Spout B

Bin Control Assembly

Agitator

Dispensing

Auger

Agitating Motor

Dispensing Motor

Spout Cover

Safety Switch

Fig. 7

Optical Sensors (-OS model)

18

Image 18
Contents DCM-300BAH-OS Hoshizaki AMERICA, INC Contents Important Safety Information UnitSpecifications Electrical Data Hoshizaki ICE MakerDCM-300BAH-OS air-cooled Dimensions/Connections DCM-300BAH-OS air-cooled II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels Push-Button ModelsOpti-Serve Models Setup Location WARNING Electrical ConnectionWater Supply and Drain Connections See FigIcemaker Final Checklist Startup Dispense Mode Switch III. Cleaning and Maintenance Cleaning and Sanitizing Instructions Cleaning ProcedureSanitizing Solution Cleaning and Sanitizing Procedure Water Dispensing Nozzle Ice Dispensing Spout Spout Cover Maintenance Frequency Area TaskPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC