Hoshizaki DCM-300BAH(-OS) How to Remove Panels, Push-Button Models, Opti-Serve Models

Page 10

B. How to Remove Panels

See Fig. 1 or Fig. 2

•Front Panel: Remove the screw. Lift up and towards you. Disconnect the connector on push-button models.

•Top Panel: Lift up at front slightly, push rearward and lift off.

•Apron Panel: Remove the screws and pull towards you. Disconnect the connectors on

Opti-Serve models.

•Side Panels: Remove the screws and pull towards you.

•Storage Bin Cover: Remove the thumbscrews and pull towards you.

DCM-300BAH

(Push-Button Models)

Storage Bin

Cover

Side Panel

Front Panel

Connector	Apron Panel
	Fig. 1

DCM-300BAH-OS

(Opti-Serve Models)

Top Panel

Side Panel

	Storage Bin	Top Panel
	Storage Bin
Side Panel	Cover
		Side Panel

Connectors

Front Panel

Apron Panel

Fig. 2

10

Image 10

Contents DCM-300BAH-OS Hoshizaki AMERICA, INC Contents Important Safety Information UnitSpecifications Electrical Data Hoshizaki ICE MakerDCM-300BAH-OS air-cooled Dimensions/Connections DCM-300BAH-OS air-cooled II. Installation and Operating Instructions Checks Before InstallationPush-Button Models How to Remove PanelsOpti-Serve Models Setup Location WARNING Electrical ConnectionWater Supply and Drain Connections See FigIcemaker Final Checklist Startup Dispense Mode Switch III. Cleaning and Maintenance Cleaning and Sanitizing Instructions Cleaning ProcedureSanitizing Solution Cleaning and Sanitizing Procedure Water Dispensing Nozzle Ice Dispensing Spout Spout Cover Maintenance Frequency Area TaskPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC