Hoshizaki AM-50BAE-ADDS, AM-50BAE-DS service manual Component Service Information

Page 29

6)A liquid charge is recommended when charging an R-134a system. Place the service cylinder on the scales; if the service cylinder is not equipped with a dip tube, invert the service cylinder, then place it on the scales. Open the high-side valve on the gauge manifold.

7)Allow the system to charge with liquid until the proper charge weight is met.

8)Close the high-side valve on the gauge manifold, then close the refrigerant access valve (if applicable). Disconnect the gauge manifold hose.

9)Cap the access valve to prevent a possible leak.

B.Component Service Information

NOTICE

When replacing a component listed below, see the notes to help ensure proper operation.

Component

Notes

Compressor

Install a new drier and PTC relay.

 

 

Hot Gas Valve

• Replace the strainer.

 

• Use copper tube of the same diameter and length when replacing valve lines.

 

 

Pump Motor

Install a new capacitor.

 

 

Thermistor

• Attach the new thermistor to the evaporator in the same location as the previous

 

thermistor.

 

• Smoothly fill the recessed area of the thermistor holder with high thermal conductive

 

type sealant. Hoshizaki America part number 4A0683-01 (Silicone Heat Sink Compound

 

10-8108 manufactured by GC Electronics), KE-4560 RTV (manufactured by ShinEtsu

 

Silicones), or equivalent are recommended.

 

• Secure the thermistor with the holder.

 

• Be very careful to prevent damage to the leads.

 

 

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents AM-50BAE AM-50BAE-DS AM-50BAE-AD AM-50BAE-ADDS Hoshizaki AMERICA, INC Contents Important Safety Information Page Page Construction Water/Refrigeration Circuit Diagram Cycle DiagnosisService Diagnosis Diagnostic Procedure Auxiliary Code C-0 and Earlier Page Page Diagnostic Procedure Auxiliary Code C-1 and Later Page Page Bin Control Check Thermistor Check No Ice Production Possible Cause Diagnostic TablesNo Ice Production Freeze Cycle Freeze-UpFreeze-Up Possible Cause Harvest Cycle Long Freeze Cycle Low Ice ProductionLow Ice Production Possible Cause Long Harvest Cycle III. Control Board Auxiliary Code C-0 and Earlier Control Board LayoutAuxiliary Code C-1 and Later VR2 Freeze Control Settings and AdjustmentsVR1 Harvest Control LED Lights Auxiliary Code C-1 and Later Control SwitchLED 1 24VAC LED 2 FreezeRefrigerant Recovery IV. Refrigeration Circuit and Component Service InformationRefrigeration Circuit Service Information Evacuation and Recharge R-134a BrazingComponent Component Service InformationMaintenance Schedule MaintenanceMaintenance Schedule Frequency Area TaskPriming Instructions Optional Drain Pump HS-0248 or HS-5061Discharge Hose VI. Preparing the Icemaker for Periods of Non-Use VII. Disposal 238 227145 200Wiring Diagrams Auxiliary Code C-1 and Later HS-0248 and HS-5061 Optional Drain Pump
Related manuals
Manual 13 pages 25.6 Kb Manual 34 pages 44.48 Kb Manual 31 pages 60.32 Kb

AM-50BAE-DS, AM-50BAE-ADDS, AM-50BAE, AM-50BAE-AD specifications

The Hoshizaki AM-50BAE ice maker stands out in the market for its efficiency and reliability, making it a popular choice among businesses seeking to provide high-quality ice for various applications. This compact and aesthetically pleasing machine is designed for ease of use, combining innovative technology with solid construction.

One of the key features of the Hoshizaki AM-50BAE is its ability to produce up to 55 pounds of crescent-shaped ice daily. This type of ice is not only visually appealing but also perfect for beverages, ensuring efficient cooling and presentation. With an ice storage capacity of about 22 pounds, this machine is well-suited for small to medium-sized establishments, including cafes, bars, and restaurants, where space is often at a premium.

The AM-50BAE employs Hoshizaki’s unique Smart Design, which includes a vertical evaporator that allows for improved ice production and longevity. This innovative evaporator design minimizes ice build-up, thereby reducing maintenance needs. In addition, the unit's durable stainless steel exterior ensures it can withstand the rigors of a busy commercial environment while maintaining a sleek and professional appearance.

Moreover, the Hoshizaki AM-50BAE features an advanced ice-making process that utilizes a cycle method, which optimizes efficiency and ensures consistent ice quality. It incorporates a robust water filtration system that enhances the purity of the ice produced, addressing the growing demand for clean and safe ice in the food service industry.

Another notable characteristic of the AM-50BAE is its energy efficiency. It is designed to be environmentally friendly, utilizing R-404A refrigerant and consuming minimal electricity, thus helping businesses save on operational costs while also reducing their carbon footprint.

With user-friendly controls, the Hoshizaki AM-50BAE is simple to operate and maintain. Regular cleaning and maintenance tasks are straightforward, allowing businesses to focus on serving their customers rather than dealing with complex machinery issues.

In summary, the Hoshizaki AM-50BAE ice maker is a reliable, efficient, and aesthetically pleasing solution for any establishment that requires a steady supply of high-quality ice. Its innovative features, advanced technology, and commitment to energy efficiency make it an excellent investment for food service professionals looking to enhance their beverage offerings.
Top Page Image Contents