Hoshizaki AM-50BAE-ADDS, AM-50BAE-DS instruction manual Screws Top Panel Notch Hinge B Filler

Page 19

6)If you would like to reverse the door hinges, do the following:

a)Contact your local distributor to purchase Hoshizaki Kit HS0229. The kit contains

"hinge (A)-left."

b)Remove the 2 screws securing the top panel, then lift it off. See Fig. 11.

c)Remove hinge (A)-right and the bracket from the right side of the unit. Set aside hinge (A)right; it is not needed. Remove the top brace from the left side. Fasten hinge (A)-left and the bracket to the left side and the top brace to the right side. See Fig. 12.

Note: When on the proper side, the gasket notch for hinge (A) is to the inside.

 

Screws

Bracket

Screw

Top Panel

 

 

 

 

 

 

Hinge (A)-Left

 

Gasket Notch

Fig. 11

Fig. 12

Screw

Top Brace

Hinge (A)-Right Not Needed

d)Remove hinge (B) from the right side of the unit and the 2 filler screws from the left side. Attach the 2 filler screws to the right side and attach hinge (B) to the left side. See Fig. 13.

e)Rotate the top panel 180° from its previous position. This brings the notch that was previously in the right rear to the left front. See Fig. 14. Hook the rear part of the panel on the body, then secure the front with the 2 screws removed in step 6a.

Screws

Top Panel

Notch

Hinge (B)

Filler

Screws

Fig. 13

Fig. 14

f)Remove hinge (C1) from the top right part of the door, flip it and reattach to the bottom left. Remove hinge (C2) from the bottom right part of the door, flip it and

reattach to the top left. See Fig. 15. Proceed to step 7.

Screws

Hinge (C2)

Fig. 15

Hinge (C1)

Screws

19

Image 19
Contents AM-50BAE AM-50BAE-DS AM-50BAE-AD AM-50BAE-ADDS Hoshizaki AMERICA, INC Contents Unit Important Safety InformationSerious injury Indicates important information about the use and careSpecifications A. Construction Electrical Data Hoshizaki ICE MakerAM-50BAE Dimensions/ConnectionsAM-50BAE-DS AM-50BAE-AD AM-50BAE-ADDS General II. Installation and Operating InstructionsChecks Before Installation LocationBetween a Cabinet and a Wall or Tall Cabinet Built-In Installation SiteA Corner AM-50BAE, AM-50BAE-AD DoorHinge Reversal Top Panel Screws Hinge B Notch Filler Parts Overlay Panel Fabrication and AttachmentAM-50BAE-DS Overlay Panel Specification Overlay Panel SpecificationAM-50BAE-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Electrical Connection SetupWater Supply and Drain Connections Final Checklist Startup Cleaning Procedure III. Cleaning and MaintenanceCleaning and Sanitizing Instructions Cleaning SolutionTabs Sanitizing Procedure Sanitizing SolutionDischarge Tube Caps Spray Assembly Separator Slope Rail Condenser MaintenanceStainless Steel Exterior Storage Bin and ScoopPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC
Related manuals
Manual 13 pages 25.6 Kb Manual 38 pages 29.09 Kb

AM-50BAE-DS, AM-50BAE-ADDS, AM-50BAE-AD specifications

The Hoshizaki AM-50BAE series is a well-regarded line of ice makers designed for commercial applications. Among its notable models are the AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS, each providing efficient ice production with different configurations to meet varied needs.

A primary feature of the AM-50BAE series is its ability to produce high-quality, crescent-shaped ice. This type of ice is ideal for maintaining the integrity of beverages, as it allows melty ice to cool drinks without diluting them too quickly. The crescent shape ensures optimal bite and retention of cold temperatures, a highly sought-after feature in foodservice settings.

The series is equipped with a reliable and efficient refrigeration system. This technology enhances the unit's capability to produce a significant amount of ice in a short amount of time. Depending on the model, the daily ice production can reach up to 98 pounds, catering to the demands of various commercial environments such as restaurants, bars, and convenience stores.

Another key characteristic is the durable stainless steel construction, which not only provides a sleek appearance but also ensures longevity and easy maintenance. The exterior material resists rust and corrosion, making it suitable for environments exposed to moisture and other elements.

All models feature a built-in ice bin, which simplifies storage and accessibility. The AM-50BAE-ADDS stands out with its additional self-dispensing capabilities, allowing for direct service to customers without the need for manual handling. This is particularly beneficial in high-traffic areas where speed and efficiency are critical.

Moreover, the AM-50BAE series incorporates advanced technology such as energy-saving mode and self-diagnostic functions. These features help in monitoring the machine’s performance, promptly alerting users of any potential malfunctions, thus minimizing downtime.

For added convenience, the intuitive control panel facilitates easy operation and ensures that users can quickly adjust settings according to their specific ice needs. The low noise operation is another advantage, making it ideal for environments where sound levels must be kept to a minimum.

In summary, the Hoshizaki AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS models are exemplary choices for those seeking efficient and high-quality ice production in commercial settings. Their combination of innovative technologies, durable construction, and user-friendly features makes them stand out in the competitive ice machine market.