Discharge Tube Caps Spray Assembly | Hoshizaki AM-50BAE-AD manual

7)Disconnect the discharge tube from the spray assembly, then slide out the spray assembly. See Fig. 39.

8)Remove the two caps. See Fig. 40.

Discharge Tube

Caps

Spray Assembly
Fig. 39	Fig. 40

9)Soak all of the removed parts and the scoop in the sanitizing solution for 10 minutes. If the spray assembly nozzles are clogged, clean them with a wire or a suitable brush.

10)Rinse the parts thoroughly with clean water.

11)Refit the 2 caps in their correct positions. Make sure the reducing pipe is in place in the center. See Fig. 41.

12)Slide in the spray assembly along the rails on the left and right brackets. See Fig. 42. Connect the discharge tube securely to the spray assembly; a loose fitting may cause a water leak.

Reducing Pipe

Left Bracket

Right Bracket

	Rail	Rail
	Caps
Fig. 41	Discharge Tube	Fig. 42
Fig. 41		Fig. 42

13)Position and lock the ice chute onto the front and rear frame pipes by pushing the ice chute down until it clicks onto both frame pipes. See Fig. 43.

14)Slide in the water tank along the rails at the bottom of the left and right brackets until it

locks into place. See Fig. 44.

Left Bracket

Right Bracket

Rear Frame

Pipe

Front Frame
Pipe	Rail	Rail
	Rail	Rail
	Ice Chute	Water Tank
		Water Tank
	Fig. 43	Fig. 44

AM-50BAE-DS, AM-50BAE-ADDS, AM-50BAE-AD specifications

The Hoshizaki AM-50BAE series is a well-regarded line of ice makers designed for commercial applications. Among its notable models are the AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS, each providing efficient ice production with different configurations to meet varied needs.

A primary feature of the AM-50BAE series is its ability to produce high-quality, crescent-shaped ice. This type of ice is ideal for maintaining the integrity of beverages, as it allows melty ice to cool drinks without diluting them too quickly. The crescent shape ensures optimal bite and retention of cold temperatures, a highly sought-after feature in foodservice settings.

The series is equipped with a reliable and efficient refrigeration system. This technology enhances the unit's capability to produce a significant amount of ice in a short amount of time. Depending on the model, the daily ice production can reach up to 98 pounds, catering to the demands of various commercial environments such as restaurants, bars, and convenience stores.

Another key characteristic is the durable stainless steel construction, which not only provides a sleek appearance but also ensures longevity and easy maintenance. The exterior material resists rust and corrosion, making it suitable for environments exposed to moisture and other elements.

All models feature a built-in ice bin, which simplifies storage and accessibility. The AM-50BAE-ADDS stands out with its additional self-dispensing capabilities, allowing for direct service to customers without the need for manual handling. This is particularly beneficial in high-traffic areas where speed and efficiency are critical.

Moreover, the AM-50BAE series incorporates advanced technology such as energy-saving mode and self-diagnostic functions. These features help in monitoring the machine’s performance, promptly alerting users of any potential malfunctions, thus minimizing downtime.

For added convenience, the intuitive control panel facilitates easy operation and ensures that users can quickly adjust settings according to their specific ice needs. The low noise operation is another advantage, making it ideal for environments where sound levels must be kept to a minimum.

In summary, the Hoshizaki AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS models are exemplary choices for those seeking efficient and high-quality ice production in commercial settings. Their combination of innovative technologies, durable construction, and user-friendly features makes them stand out in the competitive ice machine market.