Setup, Electrical Connection | Hoshizaki AM-50BAE-DS, AM-50BAE-AD

D.Setup

1)Position the icemaker in the selected permanent location.

2)Level the icemaker from side-to-side and front-to-rear by adjusting the feet.

E.Electrical Connection

WARNING

1.Electrical connection must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or severe damage to equipment.

2.This unit requires an independent power supply. See the nameplate for proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse can result in a tripped breaker, blown fuse, or damage to existing wiring. This could lead to heat generation or fire.

3.THIS UNIT MUST BE GROUNDED: This unit is equipped with a 3-prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent wall outlet. If the outlet is a

2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong wall outlet. Do not remove the ground prong from the power cord and do not use an adapter plug. Failure to follow these instructions may result in death, electric shock, or fire.

4.Do not use an extension cord.

5.Make sure the control switch is in the "OFF" position before plugging in or unplugging the unit to reduce the risk of electric shock.

6.Do not use a unit with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the unit, be sure to pull the plug, not the cord, and do not jerk the cord.

7.To reduce the risk of electric shock, do not touch the plug or control switch with damp hands.

8.The GREEN ground wire in the factory-installed power cord is connected to a screw on the rear panel where the cord enters the unit. If it becomes necessary to remove or replace the power cord, be sure to connect the power cord's ground wire to this screw upon reattachment.

•Usually an electrical permit and services of a licensed electrician are required.

•The maximum allowable voltage variation is ±10 percent of the nameplate rating.

•For optional drain pump installation, refer to the instruction manual included with the pump.

AM-50BAE-DS, AM-50BAE-ADDS, AM-50BAE-AD specifications

The Hoshizaki AM-50BAE series is a well-regarded line of ice makers designed for commercial applications. Among its notable models are the AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS, each providing efficient ice production with different configurations to meet varied needs.

A primary feature of the AM-50BAE series is its ability to produce high-quality, crescent-shaped ice. This type of ice is ideal for maintaining the integrity of beverages, as it allows melty ice to cool drinks without diluting them too quickly. The crescent shape ensures optimal bite and retention of cold temperatures, a highly sought-after feature in foodservice settings.

The series is equipped with a reliable and efficient refrigeration system. This technology enhances the unit's capability to produce a significant amount of ice in a short amount of time. Depending on the model, the daily ice production can reach up to 98 pounds, catering to the demands of various commercial environments such as restaurants, bars, and convenience stores.

Another key characteristic is the durable stainless steel construction, which not only provides a sleek appearance but also ensures longevity and easy maintenance. The exterior material resists rust and corrosion, making it suitable for environments exposed to moisture and other elements.

All models feature a built-in ice bin, which simplifies storage and accessibility. The AM-50BAE-ADDS stands out with its additional self-dispensing capabilities, allowing for direct service to customers without the need for manual handling. This is particularly beneficial in high-traffic areas where speed and efficiency are critical.

Moreover, the AM-50BAE series incorporates advanced technology such as energy-saving mode and self-diagnostic functions. These features help in monitoring the machine’s performance, promptly alerting users of any potential malfunctions, thus minimizing downtime.

For added convenience, the intuitive control panel facilitates easy operation and ensures that users can quickly adjust settings according to their specific ice needs. The low noise operation is another advantage, making it ideal for environments where sound levels must be kept to a minimum.

In summary, the Hoshizaki AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS models are exemplary choices for those seeking efficient and high-quality ice production in commercial settings. Their combination of innovative technologies, durable construction, and user-friendly features makes them stand out in the competitive ice machine market.