Hoshizaki AM-50BAE-DS, AM-50BAE-ADDS instruction manual BushingGasket Hinge

Page 20

7)Remove the bushings from hinge (C1) and hinge (C2) (the hinges attached to the door). See Fig. 16.

8)Remove the gasket from the door. See Fig. 17.

BushingGasket

Hinge

Fig. 16

Fig. 17

9)Temporarily fasten the overlay panel to the door using 2 of the M4×25 pan head screws provided. See Fig. 18.

CAUTION

Ensure that the back surface of overlay panel is flat before attaching.

10)Mark the centerpoint of the hinge (C1) and hinge (C2) holes that extend over the overlay panel. See Fig. 19.

Screws

Hinge

Door

Overlay Panel

Mark the center point.

Fig. 18

Fig. 19

11)Remove the overlay panel from the door.

12)Drill 3/8" diameter holes 1/4" (7 mm) deep where you marked on the overlay panel to accommodate the hinge (C1) and hinge (C2) bushings.

20

Image 20
Contents AM-50BAE AM-50BAE-DS AM-50BAE-AD AM-50BAE-ADDS Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications A. Construction Hoshizaki ICE Maker Electrical DataDimensions/Connections AM-50BAEAM-50BAE-DS AM-50BAE-AD AM-50BAE-ADDS II. Installation and Operating Instructions Checks Before InstallationLocation GeneralA Corner Built-In Installation SiteBetween a Cabinet and a Wall or Tall Cabinet Hinge Reversal DoorAM-50BAE, AM-50BAE-AD Top Panel Screws Hinge B Notch Filler Overlay Panel Fabrication and Attachment PartsOverlay Panel Specification AM-50BAE-DS Overlay Panel SpecificationAM-50BAE-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Setup Electrical ConnectionWater Supply and Drain Connections Final Checklist Startup III. Cleaning and Maintenance Cleaning and Sanitizing InstructionsCleaning Solution Cleaning ProcedureTabs Sanitizing Solution Sanitizing ProcedureDischarge Tube Caps Spray Assembly Separator Slope Rail Maintenance Stainless Steel ExteriorStorage Bin and Scoop CondenserPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC
Related manuals
Manual 13 pages 25.6 Kb Manual 38 pages 29.09 Kb

AM-50BAE-DS, AM-50BAE-ADDS, AM-50BAE-AD specifications

The Hoshizaki AM-50BAE series is a well-regarded line of ice makers designed for commercial applications. Among its notable models are the AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS, each providing efficient ice production with different configurations to meet varied needs.

A primary feature of the AM-50BAE series is its ability to produce high-quality, crescent-shaped ice. This type of ice is ideal for maintaining the integrity of beverages, as it allows melty ice to cool drinks without diluting them too quickly. The crescent shape ensures optimal bite and retention of cold temperatures, a highly sought-after feature in foodservice settings.

The series is equipped with a reliable and efficient refrigeration system. This technology enhances the unit's capability to produce a significant amount of ice in a short amount of time. Depending on the model, the daily ice production can reach up to 98 pounds, catering to the demands of various commercial environments such as restaurants, bars, and convenience stores.

Another key characteristic is the durable stainless steel construction, which not only provides a sleek appearance but also ensures longevity and easy maintenance. The exterior material resists rust and corrosion, making it suitable for environments exposed to moisture and other elements.

All models feature a built-in ice bin, which simplifies storage and accessibility. The AM-50BAE-ADDS stands out with its additional self-dispensing capabilities, allowing for direct service to customers without the need for manual handling. This is particularly beneficial in high-traffic areas where speed and efficiency are critical.

Moreover, the AM-50BAE series incorporates advanced technology such as energy-saving mode and self-diagnostic functions. These features help in monitoring the machine’s performance, promptly alerting users of any potential malfunctions, thus minimizing downtime.

For added convenience, the intuitive control panel facilitates easy operation and ensures that users can quickly adjust settings according to their specific ice needs. The low noise operation is another advantage, making it ideal for environments where sound levels must be kept to a minimum.

In summary, the Hoshizaki AM-50BAE-ADDS, AM-50BAE-AD, and AM-50BAE-DS models are exemplary choices for those seeking efficient and high-quality ice production in commercial settings. Their combination of innovative technologies, durable construction, and user-friendly features makes them stand out in the competitive ice machine market.