Hoshizaki AM-150BWF, AM-100BAE, AM-150BAF instruction manual Water Supply and Drain Connections

Page 10

5. WATER SUPPLY AND DRAIN CONNECTIONS

WARNING

To prevent damage to the freezer mechanism, do not operate this icemaker when the water supply is OFF, or if the pressure is below 10 PSIG (0.7 bar), the recommended water pressure. Stop the icemaker until proper water pressure is resumed.

CAUTION

1.A brass fitting for the water supply line connection is attached to the 3/4” BSP plastic threads to avoid cross-threading of the Water Valve possibly resulting in leaks. The brass fitting allows connection of a 1/2” FPT that should be connected to the potable water supply line.

2.While making the water supply line connection, use a wrench to hold the brass fitting still to prevent overtightening and damage to the plastic threads.

*Water supply inlet for the icemaker is 1/2” female pipe thread (FPT).

Note: On water-cooled model, two water supply inlets are provided. One is for the icemaker (1/2” FPT), and the other is for the water-cooled condenser (1/2” FPT).

*The brass fitting is attached as shown in Fig. 4. The fitting size is a 1/2” FPT and must be connected only to a potable water supply.

*A water supply line shut-off valve and drain valve must be installed.

*Water supply pressure should be a minimum of 10 PSIG (0.7 bar) and a maximum of 113 PSIG (7.5 bar). If the pressure exceeds 113 PSIG (7.5 bar), use a pressure reducing valve.

*Drain outlet for icemaker dump is 3/4” FPT.

Note: On water-cooled model, a 3/8” FPT is provided for the condenser drain outlet. The icemaker drain and the condenser drain piping connections must be made separately.

*Drain must be 1/4” fall per foot (2 cm fall per meter) on horizontal runs to get good flow.

*Keep a more than 2 vertical inch (5 vertical cm) air gap between the drain pipe end and the sink.

*The drain pipe must be so laid as to prevent a backflow into the Storage Bin. Provide a trap in the bin drain line to prevent odor from flowing back into the Storage Bin.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model AM-100BAE AM-150BAF AM-150BWF Foreword Hoshizaki AMERICA, INCContents General Information Construction AM-100BAEAM-150BAF AM-150BWF Ice Making Mechanism Separator Nameplate Location SET UP Electrical Connections WarningWater Supply and Drain Connections AM-100BAE AM-150BAF Final Check List Start UPPreparing the Icemaker for Long Storage more than 1 day Page Cleaning Instructions III. Maintenance and Cleaning InstructionsWater System Page Storage BIN, SLOPE, SCOOP, ETC Remove the Caps to clean and sanitize Maintenance Bin Control Thermostat Replacement Procedure Service InstructionsBin Control Thermostat Assembly Details Hoshizaki AMERICA, INC

AM-150BAF, AM-150BWF, AM-100BAE specifications

The Hoshizaki AM-150BAF, AM-100BAE, and AM-150BWF models are advanced ice-making machines that cater to the needs of various commercial environments. Hoshizaki, renowned for its commitment to quality and innovation in the foodservice industry, has designed these machines to provide efficient and reliable ice production.

The Hoshizaki AM-150BAF is a nugget ice machine that produces high-quality ice nuggets, known for their chewable texture and ability to maintain beverage temperature. This model boasts a production capacity of approximately 150 pounds of nugget ice per day, making it suitable for restaurants, bars, and healthcare facilities. One notable feature of the AM-150BAF is its advanced air-cooled system that enhances energy efficiency while ensuring consistent ice production. Additionally, it incorporates a built-in antimicrobial agent in the water reservoir, reducing the growth of bacteria and ensuring cleaner, safer ice.

Next, the Hoshizaki AM-100BAE is another gem in the Hoshizaki lineup, offering similar benefits with a focus on space efficiency. With a production capacity of around 100 pounds of nugget ice daily, this model is ideal for businesses with moderate ice needs. Its compact design allows it to fit into smaller spaces without sacrificing performance. The AM-100BAE employs Hoshizaki's unique Ice-Detection technology, which ensures ice quality and prevents overflow, thus optimizing ice production consistency while minimizing waste.

Lastly, the Hoshizaki AM-150BWF serves as a versatile option that combines functionality with advanced technology. This model also produces nugget ice and excels in high-demand environments with a production capability of approximately 150 pounds per day. The AM-150BWF features a durable stainless steel exterior, providing added resilience against the rigors of busy kitchens. Additionally, its advanced refrigeration system enhances cooling and minimizes energy consumption, making it a cost-effective choice for operators.

All three machines emphasize sustainability and energy efficiency, aligning with Hoshizaki’s commitment to environmentally friendly products. With user-friendly interfaces, low-maintenance designs, and exceptional reliability, the AM-150BAF, AM-100BAE, and AM-150BWF stand out as excellent choices for businesses seeking reliable and high-performance ice machines. The combination of innovative features and robust construction ensures that these machines will meet the rigorous demands of any commercial setting, providing peace of mind and quality service.
Top Page Image Contents