Extron electronic MDA 4V EQ Projector mounting, Furniture mounting, Projector-mounting an MDA EQ

Page 9

Installation and Operation, cont’d

6" Deep Rack Shelf

1/2 Rack Width Front False

 

Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Mounting an MDA EQ on a 6-inch rack shelf

2Attach the mounting brackets to the MDA EQ with the provided machine screws as shown in the previous figure.

3.

Hold the unit with the attached brackets against the

 

underside of the table or other furniture. On the mounting

 

surface, mark the location of the bracket’s screw holes.

4.

Drill 3/32" (2 mm) diameter pilot holes, ¼" (6.3 mm) deep

 

in the mounting surface at the marked screw locations.

5.

Insert #8 wood screws into the four pilot holes. Tighten

 

each screw into the mounting surface until slightly less

 

than ¼" of the screw head protrudes.

6.

Align the mounting screws with the slots in the brackets

 

and place the unit against the surface, with the screws

 

through the bracket slots.

7.

Slide the unit slightly forward or back, then tighten all four

 

screws to secure it in place.

Projector mounting

To projector-mount the MDA EQ, use the optional projector mounting kit (part # 70-217-01) as follows.

Furniture mounting

To furniture-mount the MDA EQ, use the optional under-desk mounting kit (part #70-212-01), as follows.

Projector

Mounting

Bracket

Ceiling

Projector

Mounting Bolt

Preparing the MDA EQ for under-desk mounting

1.

If rubber feet were previously attached to the bottom of the

 

unit, remove them.

Projector-mounting an MDA EQ

1.

If rubber feet were previously installed on the bottom of

 

the unit, remove them.

2.

Attach the mounting brackets to the MDA EQ with the

 

provided machine screws.

2-4

VersaTools® MDA EQ Series • Installation and Operation

VersaTools® MDA EQ Series • Installation and Operation

2-5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VersaTools Video Mini Distribution Amplifiers User’s ManualPrecautions Extron’s WarrantyFCC Class a Notice Projector Mounting Bracket Ceiling Bolt Quick Start Guide MDA EQ SeriesTable of Contents One Table of Contents, cont’dIntroduction MDA EQ SeriesIntroduction About this ManualAbout the MDA EQ Series Mini Distribution Amplifiers Installation and Operation TwoIntroduction MDA EQ Series Mounting the MDA EQ Series Installation and Operation, cont’dTabletop use Rack mountingFurniture mounting Projector mountingMounting an MDA EQ on a 6-inch rack shelf Preparing the MDA EQ for under-desk mountingRear Panel Features and Cabling MDA 2V EQ rear panelMDA 4V EQ rear panel MDA 4SV EQ rear panel Power connector wiring Front Panel Features and OperationMDA 2V EQ front panel MDA 4V EQ front panelAAppendix a Specifications, Part Numbers, and AccessoriesSpecifications, Parts, and Accessories Specifications, Parts, and Accessories, cont’d Models Optional AccessoriesIncluded Parts
Related manuals
Manual 19 pages 17.74 Kb

MDA 2V EQ, MDA 4SV EQ, MDA 4V EQ specifications

Extron Electronics is renowned for its innovative solutions in the field of professional audiovisual technology. Among its diverse lineup of products, the MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ stand out as exceptional multi-distribution amplifiers designed to enhance signal processing and distribution in various AV settings.

The MDA 2V EQ is a two-channel distribution amplifier that excels in providing high-quality video and audio signal distribution. It is equipped with advanced equalization capabilities that allow users to fine-tune signal levels for optimal performance over long cable runs. The MDA 2V EQ supports a wide range of video formats, including composite, S-video, and component, ensuring compatibility with various equipment. Its compact design makes it easy to integrate into existing AV setups, while its robust construction ensures reliability in demanding environments.

The MDA 4SV EQ, on the other hand, is a four-channel distribution amplifier specifically designed for S-video signals. This model also features EQ for tailoring the output levels to match varying distances between the source and the display devices. By providing four isolated outputs, it ensures that each connected device receives a clean and undistorted signal. The MDA 4SV EQ is ideal for applications that demand high-quality S-video distribution, such as corporate presentations or educational content delivery.

Meanwhile, the MDA 4V EQ extends Extron’s commitment to versatile AV solutions with its four-channel capability focused on composite video signals. Similar to its counterparts, this model includes built-in EQ, enabling precise signal adjustments. Its ability to drive multiple outputs without compromising signal integrity makes it a perfect choice for situations requiring extensive video distribution.

All three models incorporate Extron’s proprietary technologies, ensuring minimal signal degradation and enhanced performance. They feature user-friendly troubleshooting tools such as LED indicators for signal presence and power status. Additionally, these amplifiers are designed with thermal protection to avoid overheating during extended use.

In summary, the Extron MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ offer a range of features tailored for optimal video and audio distribution in professional settings. Their advanced signal management technologies, robust performance, and user-friendly design make them invaluable tools for AV professionals looking to achieve high-quality signal distribution in diverse applications.
Top Page Image Contents