Extron electronic MDA 2V EQ, MDA 4V EQ Front Panel Features and Operation, Power connector wiring

Page 11

Installation and Operation, cont’d

Smooth Ridges

A

A

SECTION A–A

 

 

 

 

0.2” (5 mm) MAX

 

Power Supply

 

Output Cord

 

 

Captive Screw

 

 

Connector

 

Power connector wiring

 

CAUTION

Do not tin the stripped power supply leads before

 

 

installing the captive screw connector. Tinned

 

 

wires are not as secure in the captive screw

 

 

connectors and can be easily pulled out. They may

 

 

also break after being bent several times.

The two power cord wires must be kept separate while the power supply is plugged in. Remove power before wiring.

Alternatively, an Extron P/S 100 Universal 12 VDC Power Supply can power up to ten MDAs or other Extron 12 VDC devices using only one AC power connector.

2Passive Loop-Thru connector — Connect a monitor (optional) to this female BNC connector (composite video) or 4-pin mini DIN connector (S-video).

3Toggle switch — Set this switch to HIGH Z if a monitor is plugged into the Passive Loop Thru connector. Setting this switch to 75 OHM simulates a monitor when none is attached to the Loop Thru connector.

4Output connectors (composite video) — Connect up to two (MDA 2V EQ) or four (MDA 4V EQ) composite video devices to these BNC connectors.

5Output connectors (S-video)— Connect up to four S-video devices to these 4-pin mini DIN connectors.

6Input connector — Connect a composite video input source to this BNC connector.

7Input connector — Connect an S-video input source to this 4-

pin mini DIN connector.

Front Panel Features and Operation

The following figures show the front panel configurations of the three MDA EQ models.

1 2

GAIN EQ GAIN EQ

VIDEO DISTRIBUTION CONTROLLER

1 2 2

MDA 2V EQ front panel

1

2

3

4

GAIN EQ GAIN EQ GAINGAIN EQ GAINGAIN EQ

VIDEO DISTRIBTUION CONTROLLER

1

2

2

2

2

MDA 4V EQ front panel

1/2

 

 

 

3/4

 

 

 

 

Y

 

C

 

 

 

Y

 

 

 

C

 

 

 

 

 

 

 

 

GAIN EQ

GAIN

GAINGAIN EQ

GAINGAIN

S-VIDEO DISTRIBUTION AMPLIFIER

1

3

4

3

4

MDA 4SV EQ

2-8

VersaTools® MDA EQ Series • Installation and Operation

VersaTools® MDA EQ Series • Installation and Operation

2-9

Image 11
Contents VersaTools Video Mini Distribution Amplifiers User’s ManualFCC Class a Notice PrecautionsExtron’s Warranty Projector Mounting Bracket Ceiling Bolt Quick Start Guide MDA EQ SeriesTable of Contents MDA EQ Series Table of Contents, cont’dOne IntroductionAbout the MDA EQ Series Mini Distribution Amplifiers IntroductionAbout this Manual Introduction MDA EQ Series Installation and OperationTwo Rack mounting Installation and Operation, cont’dMounting the MDA EQ Series Tabletop usePreparing the MDA EQ for under-desk mounting Projector mountingFurniture mounting Mounting an MDA EQ on a 6-inch rack shelfMDA 4V EQ rear panel MDA 4SV EQ rear panel Rear Panel Features and CablingMDA 2V EQ rear panel MDA 4V EQ front panel Front Panel Features and OperationPower connector wiring MDA 2V EQ front panelAAppendix a Specifications, Part Numbers, and AccessoriesSpecifications, Parts, and Accessories Included Parts Specifications, Parts, and Accessories, cont’d ModelsOptional Accessories
Related manuals
Manual 19 pages 17.74 Kb

MDA 2V EQ, MDA 4SV EQ, MDA 4V EQ specifications

Extron Electronics is renowned for its innovative solutions in the field of professional audiovisual technology. Among its diverse lineup of products, the MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ stand out as exceptional multi-distribution amplifiers designed to enhance signal processing and distribution in various AV settings.

The MDA 2V EQ is a two-channel distribution amplifier that excels in providing high-quality video and audio signal distribution. It is equipped with advanced equalization capabilities that allow users to fine-tune signal levels for optimal performance over long cable runs. The MDA 2V EQ supports a wide range of video formats, including composite, S-video, and component, ensuring compatibility with various equipment. Its compact design makes it easy to integrate into existing AV setups, while its robust construction ensures reliability in demanding environments.

The MDA 4SV EQ, on the other hand, is a four-channel distribution amplifier specifically designed for S-video signals. This model also features EQ for tailoring the output levels to match varying distances between the source and the display devices. By providing four isolated outputs, it ensures that each connected device receives a clean and undistorted signal. The MDA 4SV EQ is ideal for applications that demand high-quality S-video distribution, such as corporate presentations or educational content delivery.

Meanwhile, the MDA 4V EQ extends Extron’s commitment to versatile AV solutions with its four-channel capability focused on composite video signals. Similar to its counterparts, this model includes built-in EQ, enabling precise signal adjustments. Its ability to drive multiple outputs without compromising signal integrity makes it a perfect choice for situations requiring extensive video distribution.

All three models incorporate Extron’s proprietary technologies, ensuring minimal signal degradation and enhanced performance. They feature user-friendly troubleshooting tools such as LED indicators for signal presence and power status. Additionally, these amplifiers are designed with thermal protection to avoid overheating during extended use.

In summary, the Extron MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ offer a range of features tailored for optimal video and audio distribution in professional settings. Their advanced signal management technologies, robust performance, and user-friendly design make them invaluable tools for AV professionals looking to achieve high-quality signal distribution in diverse applications.