Extron electronic MDA 4SV EQ, MDA 4V EQ, MDA 2V EQ user manual Table of Contents

Page 4

Quick Start Guide — MDA EQ Series, cont’d

SmoothRidges

A

A

SECTION A–A

0.2” (5 mm) MAX

Power Supply

Output Cord

Captive Screw

Connector

Wiring the power cord

Step 4

Connect power cords to the input and the outputs, and turn on the equipment.

Step 5

Adjust the potentiometers for the outputs, using an Extron Tweeker.

If using very short output cables, set all pots to the default setting (the arrow on the pot pointing to the dot beside it; see illustration below).

1

2

3

4

GAIN EQ GAIN EQ GAIN EQ GAIN EQ

Potentiometers at default settings

If using long cables, follow these steps:

a.

Supply the Color Bars test signal to the input.

 

(Recommendation: Use an Extron VTG 300 Video Test

 

Generator to generate the test signal.)

b.

Adjust the Gain pot for output 1 until the signal level at

 

the far end is the same as the input (or the display shows

 

the correct brightness and contrast).

c.

Adjust the EQ pot for output 1 so that no overshoot or

 

round front corner appears at the far end on the scope (or

 

you see a sharp picture with no smearing).

d.

Repeat steps 2 and 3 for the rest of the outputs.

Table of Contents

Chapter 1 • Introduction

1-1

About this Manual

1-2

About the MDA EQ Series Mini Distribution

 

Amplifiers

1-2

Models

1-2

Features

1-2

Connection diagrams

1-3

Chapter 2 • Installation and Operation

2-1

Mounting the MDA EQ Series

2-2

Tabletop use

2-2

Rack mounting

2-3

Furniture mounting

2-4

Projector mounting

2-5

Rear Panel Features and Cabling

2-6

Front Panel Features and Operation

2-9

Appendix A • Specifications, Part Numbers, and

 

Accessories

A-1

Specifications

A-2

Models

A-4

Included Parts

A-4

Optional Accessories

A-4

All trademarks mentioned in this manual are the properties of their respective owners.

68-978-01 Rev A

Printed in USA

09 04

QS-2 VersaTools® MDA EQ Series • Quick Start Guide

VersaTools® MDA EQ Series • Table of Contents

i

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User’s Manual VersaTools Video Mini Distribution AmplifiersExtron’s Warranty PrecautionsFCC Class a Notice Quick Start Guide MDA EQ Series Projector Mounting Bracket Ceiling BoltTable of Contents Table of Contents, cont’d OneIntroduction MDA EQ SeriesAbout this Manual IntroductionAbout the MDA EQ Series Mini Distribution Amplifiers Two Installation and OperationIntroduction MDA EQ Series Installation and Operation, cont’d Mounting the MDA EQ SeriesTabletop use Rack mountingProjector mounting Furniture mountingMounting an MDA EQ on a 6-inch rack shelf Preparing the MDA EQ for under-desk mountingMDA 2V EQ rear panel Rear Panel Features and CablingMDA 4V EQ rear panel MDA 4SV EQ rear panel Front Panel Features and Operation Power connector wiringMDA 2V EQ front panel MDA 4V EQ front panelSpecifications, Part Numbers, and Accessories AAppendix aSpecifications, Parts, and Accessories Optional Accessories Specifications, Parts, and Accessories, cont’d ModelsIncluded Parts
Related manuals
Manual 19 pages 17.74 Kb

MDA 2V EQ, MDA 4SV EQ, MDA 4V EQ specifications

Extron Electronics is renowned for its innovative solutions in the field of professional audiovisual technology. Among its diverse lineup of products, the MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ stand out as exceptional multi-distribution amplifiers designed to enhance signal processing and distribution in various AV settings.

The MDA 2V EQ is a two-channel distribution amplifier that excels in providing high-quality video and audio signal distribution. It is equipped with advanced equalization capabilities that allow users to fine-tune signal levels for optimal performance over long cable runs. The MDA 2V EQ supports a wide range of video formats, including composite, S-video, and component, ensuring compatibility with various equipment. Its compact design makes it easy to integrate into existing AV setups, while its robust construction ensures reliability in demanding environments.

The MDA 4SV EQ, on the other hand, is a four-channel distribution amplifier specifically designed for S-video signals. This model also features EQ for tailoring the output levels to match varying distances between the source and the display devices. By providing four isolated outputs, it ensures that each connected device receives a clean and undistorted signal. The MDA 4SV EQ is ideal for applications that demand high-quality S-video distribution, such as corporate presentations or educational content delivery.

Meanwhile, the MDA 4V EQ extends Extron’s commitment to versatile AV solutions with its four-channel capability focused on composite video signals. Similar to its counterparts, this model includes built-in EQ, enabling precise signal adjustments. Its ability to drive multiple outputs without compromising signal integrity makes it a perfect choice for situations requiring extensive video distribution.

All three models incorporate Extron’s proprietary technologies, ensuring minimal signal degradation and enhanced performance. They feature user-friendly troubleshooting tools such as LED indicators for signal presence and power status. Additionally, these amplifiers are designed with thermal protection to avoid overheating during extended use.

In summary, the Extron MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ offer a range of features tailored for optimal video and audio distribution in professional settings. Their advanced signal management technologies, robust performance, and user-friendly design make them invaluable tools for AV professionals looking to achieve high-quality signal distribution in diverse applications.
Top Page Image Contents