Cleaning Water System

ICEU070A

1.Remove the ice from the bin.

2.Remove the air filter and then the front panel.

3.Rotate control knob counter clockwise to the Off position.

4.Turn off the water supply to the ice machine.

5.Remove top panel.

6.Remove plastic panel (evaporator cover) that covers evaporator section.

7.Remove clamp and drain cap from the bottom of the reservoir, allow all the water to drain out.

Remove Drain Cap

8.Return the drain cap and clamp to their original positions.

9.Mix approximately 3 ounces (1/10 liter) of Scale

Remover with 1.5 quarts (1.5 liter) of warm

(95-115oF.) potable water, and pour this solution over the evaporator section (bright metal tubing and inverted cups in white plastic tray at the top of the ice machine).

Ice machine cleaner contains acids. Acids can cause burns.

If concentrated cleaner comes in contact with skin, flush with water. If swallowed, do NOT induce vomiting. Give large amounts of water or milk. Call Physician immediately. Keep out of the reach of

10.Return the evaporator cover removed in step 6 to its normal position.

11.Rotate the control knob to the Normal position.

12.Operate the machine with the cleaning toggle switch in the Operation position for 5 minutes.

Pour Scale Remover Over The Evaporator

Section

13.Switch the cleaning toggle switch to the Cleaning position and operate the machine for 1 minute.

14.Repeat steps 12 and 13 three times. After the third time rotate the control knob counter clockwise to the Off position.

15.Remove evaporator cover. Pour hot water over the entire surface of the evaporator section. Return evaporator cover to its original position.

16.Pour hot water into the bin to melt any ice produced during cleaning, and to clean out the drain. Wipe the interior of the bin with mild soap and hot water, rinse with cold water.

To sanitize, mix a locally approved sanitizer solution and perform steps 17-31. A possible sanitizer solution may be obtained by mixing 1 ounce of household bleach with 2 gallons of warm (95-115oF) water.

17.Remove plastic panel (evaporator cover) that covers evaporator section.

18.Remove clamp and drain cap from the bottom of the reservoir, allow all the water to drain out.

19.Return the drain cap and clamp to their original positions.

20.Pour sanitizer solution over the evaporator section (bright metal tubing and inverted cups in white plastic tray at the top of the ice machine).

21.Spray or wash the bottom of the evaporator cover and the edges of the evaporator section with the sanitizing solution.

22.Return the evaporator cover removed in step

17to its normal position.

Page 15

ICEU070A specifications

The Ice-O-Matic ICEU070A is a high-performance ice machine designed for businesses that require a reliable source of clear, hard ice. This model stands out in the commercial ice machine market due to its efficient production capabilities, compact size, and advanced technologies that enhance operational efficiency.

One of the primary features of the ICEU070A is its ability to produce up to 700 pounds of ice per day, making it ideal for restaurants, bars, and hotels that need large quantities of ice for beverages and food preservation. The machine’s cubers produce crystal-clear, half-inch thick ice cubes, known for their durability and slow melting properties, which help maintain the integrity of drinks without excessive dilution.

The ICEU070A employs a self-contained condenser unit, simplifying installation and maintenance. This feature is particularly beneficial for businesses with limited space, as the unit does not require extensive plumbing or electrical work. Additionally, the compact design allows it to fit conveniently under counters or in tight spaces while still providing ample ice production.

One of the machine’s standout technologies is its advanced Air Cooler System, which allows it to operate efficiently in a variety of ambient temperatures. The machine is built with a stainless-steel exterior, ensuring longevity and durability, while also being easy to clean and maintain. The food-grade materials used in the construction minimize contamination risks, thus ensuring the safety and quality of the ice produced.

Another notable characteristic of the ICEU070A is its user-friendly control panel equipped with an onboard diagnostics system, which makes it easier to monitor the machine’s operation and troubleshoot any issues. The unit features a built-in water filter, which can help improve the quality and taste of the ice while reducing the need for frequent cleaning.

In terms of energy efficiency, the ICEU070A is designed to minimize water and energy consumption, making it an environmentally friendly choice for businesses looking to reduce their operational costs. Its reliable performance and consistent ice production make it a trusted option for establishments seeking a durable and effective solution for their ice-making needs.

Overall, the Ice-O-Matic ICEU070A combines efficiency, durability, and advanced technology, making it a top choice for commercial users requiring a dependable ice machine. With its robust features and compact design, it provides a perfect balance of performance and practicality, ensuring ice is always available when needed.