Ice-O-Matic ICEU070A installation manual General Information And Installation, Warranty

Page 5

ICEU070A

General Information And Installation

This model is supplied from the factory completely pre-wired and requires only electrical power connections to the wire cord provided at rear of the unit.

Make sure that the ice machine is connected to its own circuit and individually fused (see data plate for maximum fuse size). This is a cord-connected unit designed for 115 volt AC power, with a maximum fuse size of 15 amps.

Low voltage can cause improper operation and may be responsible for serious damage to the overload switch and motor windings that is not covered by warranty.

NOTE. All external wiring should conform to national, state and local standards and regulations.

Check voltage on the line and the ice maker’s data plate before connecting the unit. Extension cords must not be used.

Location: If the unit is built into a cabinet with no side ventilation, the ice production will be reduced by 20% of rated capacity, restricted space of an inch or so on each side will cause a 10% reduction. Six inches of space to the left and right will allow the unit to operate satisfactorily.

The daily ice-making capacity is directly related to the condenser air inlet temperature, water temperature, conditions of the condenser air filter and age of the machine.

To keep your Ice-O-Matic ice machine at peak performance levels, periodic maintenance checks must be carried out as indicated on the Maintenance and Cleaning section of this manual.

Warranty

The warranty statement for this product is on page 18 of this manual. Refer to it for applicable coverage. In general warranty covers defects in material or workmanship. It does not cover maintenance, corrections to installations, or situations when the machine is operated in circumstances that exceed the limitations printed in this manual.

Page 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Page Introduction ICEU070AUnpacking and Inspection SpecificationsWarranty General Information And InstallationGeneral Water Supply And Drain ConnectionsWater Supply Water DrainFinal Check List Start Up Operating InstructionsOperational Checks Component Description Close Operation Electrical SequenceOFF Freeze Cycle Cleaning Switch ICEU070A Service DiagnosisICEU070A Clean Replace Of Air Condenser Filter Maintenance And Cleaning InstructionsGeneral Ice MachineIce machine cleaner contains acids. Acids can cause burns Cleaning Water SystemRemove Thumb Screw Holding Curtain Remove Curtain Page Ice-O-Matic Parts and Labor

ICEU070A specifications

The Ice-O-Matic ICEU070A is a high-performance ice machine designed for businesses that require a reliable source of clear, hard ice. This model stands out in the commercial ice machine market due to its efficient production capabilities, compact size, and advanced technologies that enhance operational efficiency.

One of the primary features of the ICEU070A is its ability to produce up to 700 pounds of ice per day, making it ideal for restaurants, bars, and hotels that need large quantities of ice for beverages and food preservation. The machine’s cubers produce crystal-clear, half-inch thick ice cubes, known for their durability and slow melting properties, which help maintain the integrity of drinks without excessive dilution.

The ICEU070A employs a self-contained condenser unit, simplifying installation and maintenance. This feature is particularly beneficial for businesses with limited space, as the unit does not require extensive plumbing or electrical work. Additionally, the compact design allows it to fit conveniently under counters or in tight spaces while still providing ample ice production.

One of the machine’s standout technologies is its advanced Air Cooler System, which allows it to operate efficiently in a variety of ambient temperatures. The machine is built with a stainless-steel exterior, ensuring longevity and durability, while also being easy to clean and maintain. The food-grade materials used in the construction minimize contamination risks, thus ensuring the safety and quality of the ice produced.

Another notable characteristic of the ICEU070A is its user-friendly control panel equipped with an onboard diagnostics system, which makes it easier to monitor the machine’s operation and troubleshoot any issues. The unit features a built-in water filter, which can help improve the quality and taste of the ice while reducing the need for frequent cleaning.

In terms of energy efficiency, the ICEU070A is designed to minimize water and energy consumption, making it an environmentally friendly choice for businesses looking to reduce their operational costs. Its reliable performance and consistent ice production make it a trusted option for establishments seeking a durable and effective solution for their ice-making needs.

Overall, the Ice-O-Matic ICEU070A combines efficiency, durability, and advanced technology, making it a top choice for commercial users requiring a dependable ice machine. With its robust features and compact design, it provides a perfect balance of performance and practicality, ensuring ice is always available when needed.
Top Page Image Contents