Ice-O-Matic Parts and Labor | Ice-O-Matic ICEU070A manual

Ice-O-Matic

Parts and Labor

Domestic & International Limited Warranty

Mile High Equipment LLC (the “Company”) warrants Ice-O-Matic brand ice machines, ice dispensers, remote condensers, water filters, and ice storage bins to the end customer against defects in material and factory workmanship for the following:

	Cube ice machines,”GEM” model compressed ice	Ice storage bins -Twenty-four (24) month parts and labor
machines ,” MFI” model flake ice machines and remote
condensers. - Thirty-six (36) months parts and labor
	“EF” and “EMF” model flake ice machines - Twenty-four	IOD model dispensers - Twenty-four (24) months parts, Twelve (12) months labor
(24) months parts and labor
	CD model dispensers - Thirty-six (36) months parts and	Water filter systems - Twelve (12) months parts and labor (not including filter
labor		cartridges)

An additional twenty-four (24) month warranty on parts (excluding labor) will be extended to all cube ice machine evaporator plates and compressors, “GEM” model compressed ice machine compressors, and “MFI” model flake ice machine compressors from the date of original inst allation. An additional thirty-six

(36)month warranty on parts (excluding labor) will be extended to all “EF” and “EMF” model flake ice machine compressors from the date of original installation. The company will replace EXW (Incoterms 2000) the Company plant or, EXW (Incoterms 2000) the Company-authorized distributor, without cost to the Customer, that part of any such machine that becomes defective. In the event that the Warranty Registration Card indicating the installation date has not been returned to Ice-O-Matic, the warranty period will begin on the date of shipment from the Company. Irrespective of the actual installation date, the product will be warranted for a maximum of seventy-two (72) months from date of shipment from the Company.

ICE-model cube ice machines which are registered in the Water Filter Extended Warranty Program will receive a total of eighty-four (84) months parts and labor coverage on the evaporator plate from the date of original installation. Water filters must be installed at the time of installation and registered with the Company at that time. Water filter cartridges must be changed every six (6) months and that change reported to the Company to maintain the extended evaporator warranty.

No replacement will be made for any part or assembly which (I) has been subject to an alteration or accident; (II) was used in any way which, in the Company’s opinion, adversely affects the machine’s performance; (III) is from a machine on which the serial number has been altered or removed; or, (IV) uses any replacement part not authorized by the Company. This warranty does not apply to destruction or damage caused by unauthorized service, using other than Ice-O-Matic authorized replacements, risks of transportation, damage resulting from adverse environmental or water conditions, accidents, misuse, abuse, improper drainage, interruption in the electrical or water supply, charges related to the replacement of non-defective parts or components, damage by fire, flood, or acts of God.

This warranty is valid only when installation, service, and preventive maintenance are performed by a Company-authorized distributor, a Company-authorized service agency, or a Company Regional Manager. The Company reserves the right to refuse claims made for ice machines or bins used in more than one location. This Limited Warranty does not cover ice bills, normal maintenance, after-install adjustments, and cleaning.

Limitation of Warranty

This warranty is valid only for products produced and shipped from the Company after January, 2007. A product produced or installed before that date shall be covered by the Limited Warranty in effect at the date of its shipment. The liability of the Company for breach of this warranty shall, in any case, be limited to the cost of a new part to replace any part, which proves to be defective. The Company makes no representations or warranties of any character as to acessories or auxiliary equipment not manufactured by the Company. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. MILE HIGH EQUIPMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.

Filing a Claim

All claims for reimbursement must be received at the factory within 90 days from date of service to be eligible for credit. All claims outside this time period will be void. The model, the serial number and, if necessary, proof of installation, must be included in the claim. Claims for labor to replace defective parts must be included with the part claim to receive consideration. Payment on claims for labor will be limited to the published labor time allowance hours in effect at the time of repair. The Company may elect to require the return of components to validate a claim. Any defective part returned must be shipped to the Company or the Company-authorized distributor, transportation charges pre-paid, and properly sealed and tagged. The Company does not assume any responsibility for any expenses incurred in the field incidental to the repair of equipment covered by this warranty. The decision of the Company with respect to repair or replacement of a part shall be final. No person is authorized to give any other warranties or to assume any other liability on the Company’s behalf unless done in writing by an officer of the Company.

GOVERNING LAWhis Limited Warranty shall be governed by the laws of the state of Delaware, U.S.A., excluding their conflicts of law principles. The United Nations Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from application to this Limited Warranty.

Mile High Equipment LLC, 11100 East 45th Avenue, Denver, Colorado 80239 (303) 371-3737January 2007

Page 18

ICEU070A specifications

The Ice-O-Matic ICEU070A is a high-performance ice machine designed for businesses that require a reliable source of clear, hard ice. This model stands out in the commercial ice machine market due to its efficient production capabilities, compact size, and advanced technologies that enhance operational efficiency.

One of the primary features of the ICEU070A is its ability to produce up to 700 pounds of ice per day, making it ideal for restaurants, bars, and hotels that need large quantities of ice for beverages and food preservation. The machine’s cubers produce crystal-clear, half-inch thick ice cubes, known for their durability and slow melting properties, which help maintain the integrity of drinks without excessive dilution.

The ICEU070A employs a self-contained condenser unit, simplifying installation and maintenance. This feature is particularly beneficial for businesses with limited space, as the unit does not require extensive plumbing or electrical work. Additionally, the compact design allows it to fit conveniently under counters or in tight spaces while still providing ample ice production.

One of the machine’s standout technologies is its advanced Air Cooler System, which allows it to operate efficiently in a variety of ambient temperatures. The machine is built with a stainless-steel exterior, ensuring longevity and durability, while also being easy to clean and maintain. The food-grade materials used in the construction minimize contamination risks, thus ensuring the safety and quality of the ice produced.

Another notable characteristic of the ICEU070A is its user-friendly control panel equipped with an onboard diagnostics system, which makes it easier to monitor the machine’s operation and troubleshoot any issues. The unit features a built-in water filter, which can help improve the quality and taste of the ice while reducing the need for frequent cleaning.

In terms of energy efficiency, the ICEU070A is designed to minimize water and energy consumption, making it an environmentally friendly choice for businesses looking to reduce their operational costs. Its reliable performance and consistent ice production make it a trusted option for establishments seeking a durable and effective solution for their ice-making needs.

Overall, the Ice-O-Matic ICEU070A combines efficiency, durability, and advanced technology, making it a top choice for commercial users requiring a dependable ice machine. With its robust features and compact design, it provides a perfect balance of performance and practicality, ensuring ice is always available when needed.