Ice-O-Matic ICEU070A installation manual Specifications, Unpacking and Inspection

Page 4

ICEU070A

Specifications

The ice machine must be installed indoors in a controlled environment.

 

Minimum

Maximum

Air Temp

500F.

950F.

Water Temp

400F.

1000F.

Water Pressure

20 PSI

80 PSI

Voltage

103.5

126.5

Operating the ice machine outside of the above limitations, or outdoors, is potentially damaging to the machine, and it is misuse of the machine. This may void the warranty.

Ice-O-Matic ice machines are designed and manufactured with the highest regard for safety and performance. They meet or exceed the standards of agencies like NSF and UL.

Ice-O-Matic assumes no liability or responsibility of any kind for products manufactured by Ice-O-Matic that have been altered in any way, including the use of any part and/or other components not specifically approved by Ice-O-Matic.

Ice-O-Matic reserves the right to make design changes and/or improvements at any time. Specifications and design are subject to change without notice.

UNPACKING AND INSPECTION

1.Call your authorized Ice-O-Matic Distributor or Dealer for proper installation.

2.Remove the front panel of the unit and inspect for any concealed damage. Notify carrier of your claim for the concealed damage.

3.Check that refrigerant lines do not rub against or touch other lines or surfaces, and that the fan blade moves freely.

4.Check that the compressor fits snugly onto all its mounting pads.

5.Remove all internal support packing and masking tape.

Model

Electrical (volts/Hz/phase)

Fuse Size

Amps

Condenser Type

Refrigerant Charge

ICEU070A

115/60/1

15

6

Forced Air

9.5 oz R-134a

 

 

 

 

 

 

 

 

 

 

 

6"

25 5/8"

Door Opening: 12 1/8" wide by 8 1/4" tall

 

 

 

 

 

 

 

 

15 3/16"

 

 

 

20 15/16"

 

 

 

 

 

 

 

 

 

 

28 7/8"

 

34 3/16"

Min for utility connections

 

2 11/16"

3 3/4"

 

 

 

 

4 11/16"

 

5/8"

 

 

 

 

1 9/16" Cord Set

1 13/16"

11 5/8"

Legs adjust to

16 1/8"

3 1/16"

6" from base.

 

 

 

3 7/16" Drain

8 1/8"

3/4" GAS / BSPP

Page 2

Image 4
Contents Page Page ICEU070A IntroductionSpecifications Unpacking and InspectionGeneral Information And Installation WarrantyWater Supply And Drain Connections GeneralWater Supply Water DrainFinal Check List Operating Instructions Start UpOperational Checks Component Description OFF Operation Electrical SequenceClose Freeze Cycle Cleaning Switch Service Diagnosis ICEU070AICEU070A Maintenance And Cleaning Instructions Clean Replace Of Air Condenser FilterGeneral Ice MachineCleaning Water System Ice machine cleaner contains acids. Acids can cause burnsRemove Thumb Screw Holding Curtain Remove Curtain Page Ice-O-Matic Parts and Labor

ICEU070A specifications

The Ice-O-Matic ICEU070A is a high-performance ice machine designed for businesses that require a reliable source of clear, hard ice. This model stands out in the commercial ice machine market due to its efficient production capabilities, compact size, and advanced technologies that enhance operational efficiency.

One of the primary features of the ICEU070A is its ability to produce up to 700 pounds of ice per day, making it ideal for restaurants, bars, and hotels that need large quantities of ice for beverages and food preservation. The machine’s cubers produce crystal-clear, half-inch thick ice cubes, known for their durability and slow melting properties, which help maintain the integrity of drinks without excessive dilution.

The ICEU070A employs a self-contained condenser unit, simplifying installation and maintenance. This feature is particularly beneficial for businesses with limited space, as the unit does not require extensive plumbing or electrical work. Additionally, the compact design allows it to fit conveniently under counters or in tight spaces while still providing ample ice production.

One of the machine’s standout technologies is its advanced Air Cooler System, which allows it to operate efficiently in a variety of ambient temperatures. The machine is built with a stainless-steel exterior, ensuring longevity and durability, while also being easy to clean and maintain. The food-grade materials used in the construction minimize contamination risks, thus ensuring the safety and quality of the ice produced.

Another notable characteristic of the ICEU070A is its user-friendly control panel equipped with an onboard diagnostics system, which makes it easier to monitor the machine’s operation and troubleshoot any issues. The unit features a built-in water filter, which can help improve the quality and taste of the ice while reducing the need for frequent cleaning.

In terms of energy efficiency, the ICEU070A is designed to minimize water and energy consumption, making it an environmentally friendly choice for businesses looking to reduce their operational costs. Its reliable performance and consistent ice production make it a trusted option for establishments seeking a durable and effective solution for their ice-making needs.

Overall, the Ice-O-Matic ICEU070A combines efficiency, durability, and advanced technology, making it a top choice for commercial users requiring a dependable ice machine. With its robust features and compact design, it provides a perfect balance of performance and practicality, ensuring ice is always available when needed.