Ice-O-Matic IOD200, IOD150 Monthly and Initial Start UP, Sanitize the Ice Storage System

Page 11

Cleaning and Sanitizing

IOD150, IOD200, IOD250

MONTHLY AND INITIAL START UP:

Sanitize the Ice Storage System.

Note: This should be done by qualified personnel.

CLEANING PRECAUTIONS

WARNING: Disconnect Power Before Cleaning! Do not use metal scrapers, sharp objects or abrasives on the ice storage hopper, top cover and the agitator disk, as damage may result.

Do not use solvents or other cleaning agents, as they may attack the plastic material. Soap Solution – Use a mixture of mild detergent and warm (100￿F) potable water.

1.Disconnect power to the dispenser and ice machine.

2.Remove and discard all remaining ice.

3.Mix a solution of 1 ounce of household bleach to 2 gallons of potable water, or mix a solution of any locally approved sanitizer, following the directions for mixing and applying that sanitizer.

Caution: When pouring liquid into the hopper, do not exceed the rate of ½ gallon per minute.

4.Remove the agitator assembly.

5.Using a long handle nylon bristle brush, clean the interior of the hopper, and top cover with soap solution. Clean the agitator assembly with soap solution using a nylon brush or a sponge. Thoroughly rinse the hopper, top cover and agitator with clean potable water.

6.Remove merchandiser and ice chute cover from the dispenser.

7.With a nylon bristle brush or sponge, clean the inside of the ice chute, gasket and cover with soap solution and rinse thoroughly to remove all traces of detergent.

8.Re-assemble Agitator assembly. Take special care to ensure that the thumbscrew is tight.

9.Using a mechanical spray bottle filled with a sanitizing solution, spray the entire interior and agitator assembly. Allow to air dry.

10.Re-assemble ice chute assembly.

11.Using a mechanical spray bottle filled with a sanitizing solution, spray the inside of the ice chute. Allow to air dry.

12.Reinstall merchandiser.

13.Wipe the top edge of the ice hopper with the sanitizing solution, allow to air dry.

14.Pour in fresh, sanitary ice and replace the cover. Re-connect power to the dispenser and ice machine.

Page 10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Introduction Table of ContentsDimensions Inches Specifications and LimitationsOptions Field Installed Dispenser SpecificationsSite Preparation For The InstallerEquipment Description Drip Tray Assembly InstallationWater Glass Filler Kit Water Glass Filler Kit Con’t IOD150 DimensionsIOD200 and IOD250 Dimensions Completion Initial Start UpGate Restrictor Plate AdjustmentCleaning Precautions Cleaning and SanitizingSanitize the Ice Storage System Monthly and Initial Start UPTroubleprobable Cause TroubleshootingWiring Diagram

IOD200, IOD150 specifications

Ice-O-Matic has long been recognized as a leading manufacturer of ice machines, and the IOD150 and IOD200 models exemplify the company's commitment to quality, efficiency, and innovation in ice production. Designed to cater to a variety of commercial needs, these machines are engineered to be reliable and effective, making them an excellent choice for restaurants, bars, hotels, and convenience stores.

One of the standout features of both the IOD150 and IOD200 is their advanced ice production capabilities. The IOD150 can produce up to 152 pounds of ice per day, while the IOD200 increases that capacity to an impressive 202 pounds. This high-output performance ensures that businesses can meet their ice needs even during peak hours, providing customers with consistently chilled beverages and food items.

Both models are equipped with a built-in storage bin that offers ample space for ice storage. The IOD150 features a 70-pound storage capacity, while the IOD200's bin can hold up to 90 pounds of ice. This built-in storage design eliminates the need for separate ice bins, saving valuable floor space in busy commercial environments.

The design of the IOD150 and IOD200 models incorporates a user-friendly interface, making operation straightforward and efficient. The intelligent control systems monitor ice production and detect any maintenance needs, ensuring optimal performance and extending the lifespan of the machines. This feature is particularly beneficial for busy staff members who may not have specialized training in equipment management.

Energy efficiency is a critical consideration for businesses today, and Ice-O-Matic’s models do not disappoint. Both the IOD150 and IOD200 are designed to operate with low energy consumption, making them cost-effective choices for any enterprise. Their environmentally friendly operation aligns with the growing demand for sustainable practices in the food service industry.

In addition to performance and efficiency, hygiene and cleanliness are paramount in ice production. Ice-O-Matic has integrated a sanitation design in both models, which includes anti-microbial materials. This helps maintain the highest standards of cleanliness, minimizing the risk of contamination.

The IOD150 and IOD200 models represent Ice-O-Matic’s dedication to providing high-quality ice solutions that meet the diverse demands of commercial operations. With their robust features, advanced technology, and focus on efficiency, these machines stand out as top choices for any business seeking reliable ice generation.
Top Page Image Contents