For The Installer, Equipment Description

For The Installer

IOD150, IOD200, IOD250

Equipment Description

The IOD150, IOD200 and IOD250 are counter top mounted ice only dispensers. These units are designed to dispense cube ice only and have ice storage capacities of 150 lb.,220 lb. and 250 lb. respectively.

Site Preparation

The site chosen for the dispenser must be capable of supporting the dispenser with a full bin of ice plus all other loads being placed on the surface supporting the dispenser. If an ice machine is being placed on the dispenser, the weight of the ice machine must be included in the calculations to determine the support structure needed for the dispenser.

Allow sufficient clearance above the unit for removal of the cover and for pouring ice into the bin.

A 115 volt, 15 amp electric outlet needs to be located within 6 feet of the unit. The outlet must be properly grounded and fused. No other electrical appliance should be on the circuit. ALL ELECTRICAL WIRING MUST CONFORM TO NATIONAL AND LOCAL CODES

Do not place the dispenser next to heat sources such as ovens, heat ducts or in the warm air discharge from adjacent equipment.

The unit must be located near a building drain. Drain lines must be properly vented and pitched to ensure free flowing of wastewater to the drain.

These dispensers are designed to dispense cubed ice only. Do not use flaked, crushed or compressed ice forms.

If an Ice-O-Matic ice machine is to be placed on top of the dispenser, an adapter will be required.

Ice Machine Adapter	22 inch cuber	Part Number KBT15022
Ice Machine Adapter	22 inch cuber on 30 wide dispenser	Part Number KBT25022
Ice Machine Adapter	30 inch cuber	Part Number KBT25030

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates contamination of ice. To ensure continued protection and sanitation, observe the following:

ALWAYS: disconnect power to the dispenser before servicing or cleaning.

NEVER: place hands inside of hopper or grate area without disconnecting power to the dispenser. Agitator rotation occurs automatically when dispenser is energized.

ALWAYS: be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior and possible contamination of the ice.

ALWAYS: be sure the upper and lower front panels are securely fastened.

ALWAYS: keep area around the dispenser clean of ice cubes.

CAUTION: Dispenser cannot be used with crushed or flaked ice.

Use of bagged ice, which has frozen into chunks, can void warranty.

The dispenser agitator is not designed to be an ice crusher. Use of large chunks of ice which “jam up” inside the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully and completely broken into small, cubed size pieces before filling into the dispense hopper.

Page 3

IOD200, IOD150 specifications

Ice-O-Matic has long been recognized as a leading manufacturer of ice machines, and the IOD150 and IOD200 models exemplify the company's commitment to quality, efficiency, and innovation in ice production. Designed to cater to a variety of commercial needs, these machines are engineered to be reliable and effective, making them an excellent choice for restaurants, bars, hotels, and convenience stores.

One of the standout features of both the IOD150 and IOD200 is their advanced ice production capabilities. The IOD150 can produce up to 152 pounds of ice per day, while the IOD200 increases that capacity to an impressive 202 pounds. This high-output performance ensures that businesses can meet their ice needs even during peak hours, providing customers with consistently chilled beverages and food items.

Both models are equipped with a built-in storage bin that offers ample space for ice storage. The IOD150 features a 70-pound storage capacity, while the IOD200's bin can hold up to 90 pounds of ice. This built-in storage design eliminates the need for separate ice bins, saving valuable floor space in busy commercial environments.

The design of the IOD150 and IOD200 models incorporates a user-friendly interface, making operation straightforward and efficient. The intelligent control systems monitor ice production and detect any maintenance needs, ensuring optimal performance and extending the lifespan of the machines. This feature is particularly beneficial for busy staff members who may not have specialized training in equipment management.

Energy efficiency is a critical consideration for businesses today, and Ice-O-Matic’s models do not disappoint. Both the IOD150 and IOD200 are designed to operate with low energy consumption, making them cost-effective choices for any enterprise. Their environmentally friendly operation aligns with the growing demand for sustainable practices in the food service industry.

In addition to performance and efficiency, hygiene and cleanliness are paramount in ice production. Ice-O-Matic has integrated a sanitation design in both models, which includes anti-microbial materials. This helps maintain the highest standards of cleanliness, minimizing the risk of contamination.

The IOD150 and IOD200 models represent Ice-O-Matic’s dedication to providing high-quality ice solutions that meet the diverse demands of commercial operations. With their robust features, advanced technology, and focus on efficiency, these machines stand out as top choices for any business seeking reliable ice generation.