Initial Start Up, Completion | Ice-O-Matic IOD150, IOD200 specs

Initial Start Up

IOD150, IOD200, IOD250

1.Sanitize the ice storage system as instructed on Page 10.

2.Fill the hopper with sanitary ice.

3.Plug the unit’s power cord into an electrical outlet and the lighted sign should come on.

4.Dispense several containers of ice.

Note: In normal operation, pushing the ice dispenser mechanism will cause ice to flow from the ice chute. Ice flow will continue until the dispenser mechanism is released or until the hopper runs out of ice.

CAUTION: Use caution to avoid spilling ice when filling dispenser. Clean up immediately any spilled ice from filling or operating the unit. To prevent contamination of ice, the lid must be installed on the unit at all times.

Note: This unit is provided with a timer that will activate the ice dispenser rotor for 4 seconds each time the unit is plugged into an electrical outlet and every hour (1) thereafter.

The agitation cycle helps to keep the ice from fusing together during long periods of non-use. No ice is dispensed during the agitation.

Ice Machine Installation

Make sure the counter the dispenser is place on is structurally able to hold the combined weight of the dispenser, ice and ice machine.

Remove the dispenser cover. (Retain for future use)

Place the appropriate stainless steel KBT adapter onto the top of the dispenser.

22 inch wide ice machine on a 22-inch wide dispenser.	Part number KBT15022
22 inch wide ice machine on a 30-inch wide dispenser.	Part Number KBT25022
30 inch wide ice machine on a 30-inch wide dispenser.	Part Number KBT25030

Install the thermostatic bin control kit when applicable

Note: The thermostatic bin control kit is required on all ICE Series Cubers.

Install the ice machine onto the dispenser, center the machine left to right and align the machine flush to the back.

Install the thermostatic bin control cap tube into the thermal well mounted in the bin.

Note: The thermostatic bin control kit is required on all ICE Series Cubers.

Fasten together at the back of the machine using fasteners from the icemaker and mounting hardware from the kit.

Place the front cover plate onto the dispenser in front of the ice machine. Follow the ice machine start-up instructions included with the ice machine.

Completion

Make a final check for any leaks and correct as necessary.

Reinstall the splash panel and secure it with two Phillips head screws. Check for proper operation of the dispense system.

Instruct the site manager regarding the requirements for maintaining, operation and sanitizing the dispenser.

Page 7

IOD200, IOD150 specifications

Ice-O-Matic has long been recognized as a leading manufacturer of ice machines, and the IOD150 and IOD200 models exemplify the company's commitment to quality, efficiency, and innovation in ice production. Designed to cater to a variety of commercial needs, these machines are engineered to be reliable and effective, making them an excellent choice for restaurants, bars, hotels, and convenience stores.

One of the standout features of both the IOD150 and IOD200 is their advanced ice production capabilities. The IOD150 can produce up to 152 pounds of ice per day, while the IOD200 increases that capacity to an impressive 202 pounds. This high-output performance ensures that businesses can meet their ice needs even during peak hours, providing customers with consistently chilled beverages and food items.

Both models are equipped with a built-in storage bin that offers ample space for ice storage. The IOD150 features a 70-pound storage capacity, while the IOD200's bin can hold up to 90 pounds of ice. This built-in storage design eliminates the need for separate ice bins, saving valuable floor space in busy commercial environments.

The design of the IOD150 and IOD200 models incorporates a user-friendly interface, making operation straightforward and efficient. The intelligent control systems monitor ice production and detect any maintenance needs, ensuring optimal performance and extending the lifespan of the machines. This feature is particularly beneficial for busy staff members who may not have specialized training in equipment management.

Energy efficiency is a critical consideration for businesses today, and Ice-O-Matic’s models do not disappoint. Both the IOD150 and IOD200 are designed to operate with low energy consumption, making them cost-effective choices for any enterprise. Their environmentally friendly operation aligns with the growing demand for sustainable practices in the food service industry.

In addition to performance and efficiency, hygiene and cleanliness are paramount in ice production. Ice-O-Matic has integrated a sanitation design in both models, which includes anti-microbial materials. This helps maintain the highest standards of cleanliness, minimizing the risk of contamination.

The IOD150 and IOD200 models represent Ice-O-Matic’s dedication to providing high-quality ice solutions that meet the diverse demands of commercial operations. With their robust features, advanced technology, and focus on efficiency, these machines stand out as top choices for any business seeking reliable ice generation.