Grindmaster P400ESHP instruction manual Shuttle Brewers & Airpot/Shuttle Brewers

Page 8

4)If the maximum temperature adjustment needs to be increased, insert a small flat screwdriver into the shaft. Turn the calibration screw counter clockwise to increase the maximum temperature.

Optional Solid State Thermostat: This control maintains temperature within 3°F. The adjustable range is from 155°F to 205°F.

See Figure 6.

1)Shut off power and open top cover.

2)Locate thermostat on bracket mounted to front panel.

3)Adjust the knob to the temperature desired. This control cannot be set above 205°F.

Figure 6

Solid State Thermostat

Optional Brew Thermostat Adjustment: Your brewer may include the optional low temp/no brew thermostat, (see Figure 7). This will not allow a brew unless the water is up to temperature. The factory setting is 192°F. If you wish to adjust this, do the following:

1)Shut off power and remove top cover.

2)Locate the thermostat mounted on the water tank.

3)To increase the set point, turn the shaft clockwise. We do not recommend adjusting this above 192°F which may cause excessive delays between batches.

4)For accurate setting of the thermostat, remove the bulb from the brewer and immerse in water known to be 190°F. Adjust the

knob so the thermostat closes at this point.

Figure 7

Brew Thermostat

Shuttle Brewers & Airpot/Shuttle Brewers

Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Shuttle Brewer & Airpot/Shuttle Brewers Installation Electric Hook-upStart-up Shuttle Brewers & Airpot/Shuttle BrewersHot liquid in brew basket could cause burns Remove with care Operation HOT Liquid HazardAdjusting the Timer AdjustmentsBrew Volume, Brew Timer Two Batch Timer with Knob Adjustment, See Figure To Adjust the Bypass Thermostat AdjustmentShuttle Brewers & Airpot/Shuttle Brewers Every Day CleaningAfter Each Brew Service Weekly or Bi-Weekly, Depending on UseRemove Heater Drain Water TankRemove Brew Valve Troubleshooting Filling, Heating, and Brewing Filling ProblemsRecovery time is Problem Possible Cause Service Check Remedy Brew volume too Parts Illustration for Models P300E & P400E DescriptionParts Illustration for Model P400ESHP Parts Illustration for Model RAP400E ABB1.5PParts Illustration for Model RAPS400E AABW-RParts Illustration for Model VSB-400 Parts Illustration for Shuttle CS-LL LID Stopper W/ O-RINGRough-In Drawing for Model P-300 Rough-In Drawing for Model P-400 & P-400ESHP Rough-In Drawing for Model RAP-300 Rough-In Drawing for Model RAP-400 Rough-In Drawing for Model RAPS-300 Rough-In Drawing for Model RAPS-400 Rough-In Drawing for Model VSB-300 Rough-In Drawing for Model VSB-400 Wiring Diagram for P300E/P400E, with 1 Batch Timer Wiring Diagram for P300E/P400E, with 2 Batch Timer Wiring Diagram for RAP300E/400E Wiring Diagram for Raps 300/400E Wiring Diagram for P-400ESHP Wiring Diagram #091-548 Wiring Diagram #091-182 For this Heat and Electric Service Wire PER FIGGrindmaster Corporation Form # AM-309-08 090-077

P400ESHP specifications

The Grindmaster P400ESHP is a top-of-the-line espresso machine designed for both efficiency and performance, catering to the needs of coffee professionals and enthusiasts alike. Its robust construction and innovative features make it a versatile choice for various establishments, from bustling coffee shops to high-end restaurants.

One of the primary features of the P400ESHP is its dual boiler system. This technology allows for simultaneous brewing and steaming, significantly reducing wait times during peak hours. The independent temperature control for each boiler ensures that each espresso shot is extracted under optimal conditions, enhancing the flavor and aroma profile of the coffee.

Additionally, the Grindmaster P400ESHP incorporates advanced PID temperature control. This precision technology ensures consistent temperature stability, which is crucial for producing high-quality espresso. The ability to adjust temperatures in real-time gives baristas the flexibility to experiment with different coffee beans and brewing methods, resulting in a bespoke coffee experience.

The P400ESHP is equipped with a user-friendly touchscreen interface that simplifies navigation through its various settings. Baristas can easily program drink recipes and access maintenance reminders, streamlining workflow and allowing for greater focus on quality beverage preparation.

Moreover, the machine features a powerful 20-bar pump that produces rich crema, enhancing the overall aesthetics and taste of the espresso. The high-performance steam wand is ergonomic, providing excellent control over frothing and texturing milk for lattes and cappuccinos. The wand’s ability to produce dry steam ensures that milk is heated quickly without excess moisture.

In terms of design, the Grindmaster P400ESHP boasts a sleek, stainless steel body that not only looks professional but also ensures durability in a busy environment. It is thoughtfully designed for easy access to internal components, facilitating straightforward maintenance and service.

The P400ESHP also focuses on energy efficiency, with an automatic shut-off feature that conserves power when the machine is not in use. This not only lowers operational costs but also aligns with environmentally-conscious practices.

In conclusion, the Grindmaster P400ESHP stands out as an advanced espresso machine that combines technology, efficiency, and user-centered design. Its outstanding features make it an ideal choice for coffee professionals seeking to elevate their beverage offerings while maintaining consistency and quality.
Top Page Image Contents