Under-furniture mounting

Installation and Operation, cont’d

1U Universal Rack Shelf	1/2 Rack Width
	Front False
	Faceplate 1/4 Rack Width
	Front False
	Faceplate

Both front false faceplates use 2 screws.

Use 2 mounting holes on opposite corners.

(2) 4-40 x 3/16" Screws

Figure 2-3 — Under-desk mounting

Figure 2-2 — Mounting the transmitter or receiver unit on a standard rack shelf

The unit can be mounted under a horizontal surface using an optional MBU 125 under-desk mounting kit (part #70-077-01). Mount the unit under a desk or table as follows:

1.	Secure the under-desk mounting brackets to the
	transmitter or receiver with the four machine screws
	provided in the mounting kit (figure 2-3).
2.	Hold the transmitter or receiver with attached brackets
	against the underside of the desk or other furniture. Mark
	the location of holes for screws on the desk.
3.	Drill 1/4" (6.4 mm) deep, 3/32" (2 mm) diameter pilot
	holes in the table or desk at the marked screw locations
	from the underside or inside (the concealed side) of the
	furniture, where the transmitter or receiver will be located.
4.	Insert the four wood screws into the pilot holes. Fasten
	each screw into the installation surface until just less than
	1/4" of the screw head protrudes.
5.	Align the installed screws with the slots in the mounting
	brackets, and place the transmitter or receiver against the
	surface, with the screws through the bracket slots.
6.	Slide the transmitter or receiver slightly forward or back,
	then tighten all four screws to fasten it in place.

Through-furniture mounting

The transmitter or receiver can be mounted through a desk or other furniture using an optional Extron MBD 129 through-desk mounting kit, part #70-077-02. Mount the transmitter or receiver through a desk or table as follows (figure 2-4):

Figure 2-4 — Through-desk mounting

2-4

DVI 201 Tx/Rx • Installation and Operation

2-5

68-1034-02 Rev. A specifications

Extron Electronics is a renowned manufacturer of innovative audio-visual solutions, known for providing high-quality products that serve a variety of industries. Among their extensive portfolio, the Extron 68-1034-02 Rev. A stands out as a sophisticated educational tool designed to enhance the presentation experience in classrooms and lecture halls.

The Extron 68-1034-02 Rev. A is primarily an instructional tool enabling educators to manage and distribute audio and video signals efficiently. One of its main features is its ability to support multiple input sources, including HDMI, VGA, and audio inputs, allowing for seamless integration of various devices. This flexibility ensures that educators can utilize the technology they are most comfortable with, whether it be laptops, tablets, or desktop computers.

This device employs advanced scaling technology, which ensures that all content is displayed at an optimal resolution regardless of the source. This is critical in educational environments where clarity and detail can significantly impact learning. By utilizing high-performance scaling algorithms, the 68-1034-02 Rev. A guarantees that images maintain their quality during transitions, providing a consistent viewing experience.

One of the standout characteristics of the Extron 68-1034-02 Rev. A is its user-friendly interface. The device features a straightforward control layout with clearly labeled buttons for ease of operation. This is particularly essential in educational settings where instructors may not be tech-savvy. Additionally, the device can be configured for remote management, allowing IT personnel to troubleshoot and manage settings from a distance, thereby enhancing operational efficiency.

Another significant technology embedded in this model is its robust signal processing capabilities. The device boasts low latency, ensuring that audio and video synchronization is maintained even during demanding presentations. This is crucial in maintaining audience engagement, as any delay can disrupt the flow of information.

Moreover, the Extron 68-1034-02 Rev. A includes comprehensive audio control features, allowing educators to adjust sound levels and equalization in real-time. This ensures that every participant in the room can hear the presentation clearly, which is vital for effective communication.

In summary, the Extron 68-1034-02 Rev. A is an exemplary product specifically tailored for educational environments. With its multiple input capabilities, advanced scaling technology, user-friendly design, low-latency processing, and audio control features, it stands as a testament to Extron's commitment to enhancing the learning experience through innovative audiovisual solutions.