Projector mounting

Installation and Operation, cont’d

1.	Loosely attach the mounting brackets to the transmitter
	or receiver using the four machine screws and washers
	supplied with the mounting kit.
2.	Hold the transmitter or receiver against the inside of the
	surface through which it will be mounted. Mark the four
	screw holes on the inside of the surface to which you are
	mounting the device.
3.	Drill four pilot holes, each 3/32" in diameter by 1/4" deep,
	where you made marks.
4.	Using the provided four wood screws, secure the brackets
	to the mounting surface.
5.	Slide the transmitter or receiver up and down in the
	mounting brackets until the face of the transmitter or
	receiver is at the desired height. Tighten the screws that
	secure the brackets in place.

If the screws are inaccessible to a screwdriver:

a. Mark the location of the brackets relative to the screws.

b. Remove the transmitter or receiver from inside the furniture.

c. Tighten the screws.

d. Replace the unit inside the surface (step 4).

The receiver can be mounted on a projector bracket using either of the following optional Extron projector mounting kits:

•PMK 300 projector mounting kit (part #70-374-01)

•PMK 350 low profile projector mounting kit

(part #70-563-02[black] or part #70-563-03[white])

PMK 300 mounting

Mount the receiver to a PMK 300 bracket as follows:

1.	If necessary, remove the feet from the bottom of the
	receiver.
2.	Mount the receiver to one of the bracket’s three mounting
	plates using two of the supplied 4-40 x 3/16" screws in
	opposite (diagonal) corners to secure the device to the
	bracket. It can be vertically mounted facing either up or
	down (figure 2-5).

NOn the side mounting plates, the device is typically mounted on the outside of the bracket.

On the front mounting plate, the device is typically mounted on the inside of the bracket.

Side Mounting

Plate

Bracket

Brace

U-Bolt

Extron

DVI 201 or HDMI 201

Receiver

Power Supply

Extron

PMK 300

Multi-product Projector Mount Kit

Front Mounting

Plate

Figure 2-5 — PMK 300 projector mounting a receiver

3. If the power supply is connected to the receiver, use the two included tie wraps to strap the power supply to one of the brackets.

2-6

DVI 201 Tx/Rx • Installation and Operation

2-7

68-1034-02 Rev. A specifications

Extron Electronics is a renowned manufacturer of innovative audio-visual solutions, known for providing high-quality products that serve a variety of industries. Among their extensive portfolio, the Extron 68-1034-02 Rev. A stands out as a sophisticated educational tool designed to enhance the presentation experience in classrooms and lecture halls.

The Extron 68-1034-02 Rev. A is primarily an instructional tool enabling educators to manage and distribute audio and video signals efficiently. One of its main features is its ability to support multiple input sources, including HDMI, VGA, and audio inputs, allowing for seamless integration of various devices. This flexibility ensures that educators can utilize the technology they are most comfortable with, whether it be laptops, tablets, or desktop computers.

This device employs advanced scaling technology, which ensures that all content is displayed at an optimal resolution regardless of the source. This is critical in educational environments where clarity and detail can significantly impact learning. By utilizing high-performance scaling algorithms, the 68-1034-02 Rev. A guarantees that images maintain their quality during transitions, providing a consistent viewing experience.

One of the standout characteristics of the Extron 68-1034-02 Rev. A is its user-friendly interface. The device features a straightforward control layout with clearly labeled buttons for ease of operation. This is particularly essential in educational settings where instructors may not be tech-savvy. Additionally, the device can be configured for remote management, allowing IT personnel to troubleshoot and manage settings from a distance, thereby enhancing operational efficiency.

Another significant technology embedded in this model is its robust signal processing capabilities. The device boasts low latency, ensuring that audio and video synchronization is maintained even during demanding presentations. This is crucial in maintaining audience engagement, as any delay can disrupt the flow of information.

Moreover, the Extron 68-1034-02 Rev. A includes comprehensive audio control features, allowing educators to adjust sound levels and equalization in real-time. This ensures that every participant in the room can hear the presentation clearly, which is vital for effective communication.

In summary, the Extron 68-1034-02 Rev. A is an exemplary product specifically tailored for educational environments. With its multiple input capabilities, advanced scaling technology, user-friendly design, low-latency processing, and audio control features, it stands as a testament to Extron's commitment to enhancing the learning experience through innovative audiovisual solutions.