Extron electronic 68-1034-02 Rev. A user manual PMK 350 mounting

Page 12

Installation and Operation, cont’d

NThe PMK 300 has a hole in the bottom plate that allows the projector pole to be inserted through the center of the plate (figure 2-6), rather than outside of the plate (figure 2-5). To install the PMK 300 in this configuration, slide the bracket up from the bottom of the pole before the projector is installed on the pole.

Bracket

Brace

U-Bolt

Extron

PMK 300

 

Multi-product Projector

Mount Kit

Figure 2-6 — Projector pole on the inside

4.

Place the contoured bracket brace against the pole and

 

opposite the back plate. The pole should fit snugly into the

 

depression in the center of the bracket brace.

5.

Place the U-bolt around the ceiling pole. Insert the

 

two legs of the U-bolt through the round holes on the

contoured bracket brace and then through the slotted holes on the bracket’s mounting plate.

NThe supplied U-bolt fits a typical (1.5" to 2.0" diameter) ceiling pole.

6.

Secure the bracket to the U-bolt with the included hex

 

nuts, washers, and lock washers. Tighten the hex nuts just

 

enough that they can be loosened by hand.

PMK 350 mounting

Mount the receiver to a PMK 350 bracket as follows:

1. Remove the front and rear plates from the PMK 350 (figure 2-7), using an Extron Tweeker or a #2 Philips screwdriver. Retain the screws to reattach the plates when you are finished.

 

Extron

Rear Plate

Quarter-rack

 

Sized Product

 

Contoured

 

Base

 

L-shaped

 

Bracket

Extron

U-bolt

PMK 350

 

Multi-product Projector

 

Mounting Kit

 

 

Extron

 

Power Supply

 

Front Plate

Cover Sheet

Figure 2-7 — PMK 350 projector mounting a receiver

2.

If necessary, remove the feet from the bottom of the

 

receiver.

3.

Secure the receiver to one side of the mounting tray,

 

using two of the supplied 4-40 x 3/16" screws in opposite

 

(diagonal) corners.

4.

If power supply is connected to the receiver, use the

 

two included tie wraps to strap the power supply to the

 

bracket.

5.

Place the PMK 350 around the projector ceiling mounting

 

pole (figure 2-7).

2-8

DVI 201 Tx/Rx • Installation and Operation

DVI 201 Tx/Rx • Installation and Operation

2-9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User’s Manual Digital Video Transmitter and ReceiverPrecautions Extron’s Warranty安全须知 中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d DVI 201 Tx/RxIntroduction About this ManualAbout the DVI 201 Transmitters and Receivers Features Introduction, cont’dTP cable advantages Control communicationsTwo Installation and Operation Mounting the Tx/RxNon-Decora unit mounting Installation and Operation, cont’d Under-furniture mountingThrough-furniture mounting Projector mounting PMK 300 mountingIf power supply is connected to the receiver , use PMK 350 mountingUL/Safety Requirements Preparing the site and installing the wall boxDecora unit mounting 10 Installing the wall box Final installation ConnectionsTransmitter connections Local output DVI 201 Tx non-Decora only If desired Audio input DVI 201 a D Tx Decora only Connect anIf the unpowered unit’s Power LED is not lit Receiver connectionsReceiver input connector Connect one end of the two Audio Input connector DVI 201 a D Rx Decora onlyPin assignments and wiring Audio output connector DVI 201 a D Tx Decora onlyDVI connector pin assignments Pin SignalPower supply wiring Terminating shielded cableRS-232 connector wiring OperationTransmitter control and indicator Receiver indicatorPower LED DDC Route switch DVI 201 Tx non-Decora onlyTroubleshooting DVI 201 actively buffers the Hdcp keyInstallation and Operation, cont’d Application Examples Audio conversionAAppendix a Specifications Reference InformationReference Information, cont’d Control/remote external device pass-throughGeneral Mounting accessories Part NumbersTransmitter/receiver pair part numbers Included partsDecora Template Dimensions CablesAdapters Reference Information, cont’d

68-1034-02 Rev. A specifications

Extron Electronics is a renowned manufacturer of innovative audio-visual solutions, known for providing high-quality products that serve a variety of industries. Among their extensive portfolio, the Extron 68-1034-02 Rev. A stands out as a sophisticated educational tool designed to enhance the presentation experience in classrooms and lecture halls.

The Extron 68-1034-02 Rev. A is primarily an instructional tool enabling educators to manage and distribute audio and video signals efficiently. One of its main features is its ability to support multiple input sources, including HDMI, VGA, and audio inputs, allowing for seamless integration of various devices. This flexibility ensures that educators can utilize the technology they are most comfortable with, whether it be laptops, tablets, or desktop computers.

This device employs advanced scaling technology, which ensures that all content is displayed at an optimal resolution regardless of the source. This is critical in educational environments where clarity and detail can significantly impact learning. By utilizing high-performance scaling algorithms, the 68-1034-02 Rev. A guarantees that images maintain their quality during transitions, providing a consistent viewing experience.

One of the standout characteristics of the Extron 68-1034-02 Rev. A is its user-friendly interface. The device features a straightforward control layout with clearly labeled buttons for ease of operation. This is particularly essential in educational settings where instructors may not be tech-savvy. Additionally, the device can be configured for remote management, allowing IT personnel to troubleshoot and manage settings from a distance, thereby enhancing operational efficiency.

Another significant technology embedded in this model is its robust signal processing capabilities. The device boasts low latency, ensuring that audio and video synchronization is maintained even during demanding presentations. This is crucial in maintaining audience engagement, as any delay can disrupt the flow of information.

Moreover, the Extron 68-1034-02 Rev. A includes comprehensive audio control features, allowing educators to adjust sound levels and equalization in real-time. This ensures that every participant in the room can hear the presentation clearly, which is vital for effective communication.

In summary, the Extron 68-1034-02 Rev. A is an exemplary product specifically tailored for educational environments. With its multiple input capabilities, advanced scaling technology, user-friendly design, low-latency processing, and audio control features, it stands as a testament to Extron's commitment to enhancing the learning experience through innovative audiovisual solutions.
Top Page Image Contents