Extron electronic 68-1034-02 Rev. A user manual Reference Information, Specifications

Page 26

Reference Information

Specifications

Video input and loop-through — transmitters

Number/signal type

1 DVI-D/HDMI* input, 1920x1200

 

@ 60 Hz max. resolution

 

1 DVI-D/HDMI* local loop-through

Connectors

 

DVI 201 Tx/Rx

2 DVI-D female

DVI 201 A D Tx/Rx

2 DVI-I female

Interconnection between transmitter and receiver

Connectors

2 RJ-45 per unit for 2 CAT 5/5e/6 or

 

STP (shielded twisted pair) cables

 

connecting the transmitter and receiver

Termination standards

TIA/EIA T 568A or T 568B. Pin

 

configurations for each standard are

 

available in the manual’s installation

 

chapter.

Bit rate

5 gigabits/second total (1.65 gigabits/

 

second/color)

Signal transmission distance

 

1920x1200 @ 60 Hz (the highest resolution of the single link DVI

standard)

STP (shielded twisted pair cable) 125' (38 m)

CAT 5/5e/6 cable...... 100' (30 m)

HDTV (1080i or 720p) or 1024x768 @ 60 Hz

CAT 5/5e/6 or STP (shielded twisted pair) cable 200' (60 m)

NThe transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — receivers

Number/signal type

1 DVI-D/HDMI*, 1920x1200 @ 60 Hz max.

 

resolution

Connectors

 

DVI 201 Tx/Rx

2 DVI-D female

DVI 201 A D Tx/Rx

2 DVI-I female

Audio — DVI 201 A D Tx/Rx

Gain

Unbalanced output: 0 dB;

 

balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.10% @ 1 kHz at nominal level

S/N

>85 dB at maximum output (unweighted)

Stereo channel separation

>86 dB @ 1 kHz

Audio input — DVI 201 A D Tx/Rx

Number/signal type

 

DVI 201 A D Tx

1 stereo, unbalanced

DVI 201 A D Rx

1 stereo, balanced/unbalanced

Connectors

 

DVI 201 A D Tx

(1) 3.5 mm mini audio jack (tip, ring,

 

sleeve)

DVI 201 A D Rx

(1) 3.5 mm captive screw connector, 5 pole

Impedance

 

DVI 201 A D Tx

>10k ohms unbalanced, DC coupled

DVI 201 A D Rx

>18k ohms unbalanced, 14k ohms

 

balanced, DC coupled

Nominal level

 

DVI 201 A D Tx

-10 dBV (316 mVrms)

DVI 201 A D Rx

+4 dBu (1.23 Vrms)

Maximum level

 

DVI 201 A D Tx

+11 dBu, unbalanced at 1% THD+N

DVI 201 A D Rx

+16.8 dBu, unbalanced at 1% THD+N

N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output — DVI 201 A D Tx/Rx

Number/signal type

 

DVI 201 A D Tx

1 stereo, balanced/unbalanced

DVI 201 A D Rx

1 stereo, unbalanced

Connectors

 

DVI 201 A D Tx

(1) 3.5 mm captive screw connector, 5 pole

DVI 201 A D Rx

(1) 3.5 mm mini audio jack (tip, ring,

 

sleeve)

Impedance

 

DVI 201 A D Tx

50 ohms unbalanced, 100 ohms balanced

DVI 201 A D Rx

50 ohms unbalanced

A-2

DVI 201 Tx/Rx • Reference Information

DVI 201 Tx/Rx • Reference Information

A-3

Image 26
Contents User’s Manual Digital Video Transmitter and ReceiverPrecautions Extron’s Warranty安全须知 中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d DVI 201 Tx/RxAbout the DVI 201 Transmitters and Receivers IntroductionAbout this Manual TP cable advantages FeaturesIntroduction, cont’d Control communicationsTwo Non-Decora unit mounting Installation and OperationMounting the Tx/Rx Through-furniture mounting Installation and Operation, cont’dUnder-furniture mounting Projector mounting PMK 300 mountingIf power supply is connected to the receiver , use PMK 350 mountingDecora unit mounting UL/Safety RequirementsPreparing the site and installing the wall box 10 Installing the wall box Transmitter connections Final installationConnections Local output DVI 201 Tx non-Decora only If desired Audio input DVI 201 a D Tx Decora only Connect anIf the unpowered unit’s Power LED is not lit Receiver connectionsReceiver input connector Connect one end of the two Audio Input connector DVI 201 a D Rx Decora onlyDVI connector pin assignments Pin assignments and wiringAudio output connector DVI 201 a D Tx Decora only Pin SignalPower supply wiring Terminating shielded cableRS-232 connector wiring OperationPower LED Transmitter control and indicatorReceiver indicator DDC Route switch DVI 201 Tx non-Decora onlyTroubleshooting DVI 201 actively buffers the Hdcp keyInstallation and Operation, cont’d Application Examples Audio conversionAAppendix a Specifications Reference InformationGeneral Reference Information, cont’dControl/remote external device pass-through Transmitter/receiver pair part numbers Mounting accessoriesPart Numbers Included partsAdapters Decora Template DimensionsCables Reference Information, cont’d

68-1034-02 Rev. A specifications

Extron Electronics is a renowned manufacturer of innovative audio-visual solutions, known for providing high-quality products that serve a variety of industries. Among their extensive portfolio, the Extron 68-1034-02 Rev. A stands out as a sophisticated educational tool designed to enhance the presentation experience in classrooms and lecture halls.

The Extron 68-1034-02 Rev. A is primarily an instructional tool enabling educators to manage and distribute audio and video signals efficiently. One of its main features is its ability to support multiple input sources, including HDMI, VGA, and audio inputs, allowing for seamless integration of various devices. This flexibility ensures that educators can utilize the technology they are most comfortable with, whether it be laptops, tablets, or desktop computers.

This device employs advanced scaling technology, which ensures that all content is displayed at an optimal resolution regardless of the source. This is critical in educational environments where clarity and detail can significantly impact learning. By utilizing high-performance scaling algorithms, the 68-1034-02 Rev. A guarantees that images maintain their quality during transitions, providing a consistent viewing experience.

One of the standout characteristics of the Extron 68-1034-02 Rev. A is its user-friendly interface. The device features a straightforward control layout with clearly labeled buttons for ease of operation. This is particularly essential in educational settings where instructors may not be tech-savvy. Additionally, the device can be configured for remote management, allowing IT personnel to troubleshoot and manage settings from a distance, thereby enhancing operational efficiency.

Another significant technology embedded in this model is its robust signal processing capabilities. The device boasts low latency, ensuring that audio and video synchronization is maintained even during demanding presentations. This is crucial in maintaining audience engagement, as any delay can disrupt the flow of information.

Moreover, the Extron 68-1034-02 Rev. A includes comprehensive audio control features, allowing educators to adjust sound levels and equalization in real-time. This ensures that every participant in the room can hear the presentation clearly, which is vital for effective communication.

In summary, the Extron 68-1034-02 Rev. A is an exemplary product specifically tailored for educational environments. With its multiple input capabilities, advanced scaling technology, user-friendly design, low-latency processing, and audio control features, it stands as a testament to Extron's commitment to enhancing the learning experience through innovative audiovisual solutions.