GE Monogram ZGU48L6RDSS dimensions Cutting the Countertop Opening, Installation Information

Monogram.™

ZGU48L6RDSS—48" Professional Gas Cooktop

Dimensions and Specifications (in inches)

47-7/8"26-5/8"

8-7/16"

22-3/4"

46-5/16"

7/8"

2-1/2"

8"

Cutting the Countertop Opening:

Measure carefully when cutting the countertop. Make sure sides of the opening are parallel.

•This Monogram™ gas cooktop is designed to fit in 48" or larger base cabinet.

•This cooktop requires 8" free space below the countertop.

•The cooktop is designed to hang from the countertop from its side flanges.

The countertop must be strong enough to support the weight of the cooktop.

•Smooth any rough edges on the countertop before installing.

–Formica countertop edges must be finished.

•Support cleats can be secured to cabinet sides OR build a support deck or box inside the cabinet which will support the weight of the cooktop.

–Build the support box using a solid material, cut a 5" x 5" square in the left rear corner for the gas inlet and power cord clearances.

Installation Information:

Adjacent Cabinet

and Countertop

Counter Sunk

Screws

2"

17"

16"

Locate gas inlet on back wall or on floor 2" from back wall

Before installing, consult installation instructions (Pub. No. 49-8812) packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

RLaboratories

Specification Created 7/01