Remove Packaging, Install Water Line | GE Monogram ZICS360 LH

Installation Instructions

STEP 1 REMOVE PACKAGING

CAUTION: Refrigerator is much heavier at the top than at the bottom – be careful when moving. When using a hand truck, handle from side only.

PRUDENCE: Le réfrigérateur est beaucoup plus lourd en haut qu'en bas. Il faut être prudent lors des déplacements. Si un diable est utilisé, il faut soulever le réfrigérateur sur le côté seulement.

• Carefully cut banding at the top and bottom,

remove outer carton.

• Slide out back corner posts (2).

Toekick

Remove

Tie-Downs

•Remove the four 7/16" bolts securing the straps to the skid.

CAUTION: DO NOT

ATTEMPT TO ROLL UNIT OFF SKID.

PRUDENCE: IL NE

FAUT PAS ESSAYER DE FAIRE ROULER LE RÉFRIGÉRATEUR POUR L'ENLEVER DE LAY PALETTE.

• Slide carton off top of cabinet.

NOTE: IT IS NOT NECESSARY TO LAY CABINET DOWN IN ORDER TO REMOVE SKID!

•The unit is secured to the skid with 4 slotted tie-down straps. Remove the four 5/16" bolts from the base channels in the tie-downs.

STEP 2 INSTALL WATER LINE

•A cold water supply is required for automatic icemaker operation. The water pressure must be between 40 and 120 p.s.i.

•Route 1/4" OD copper or GE SmartConnect™ plastic tubing between house cold water line and the water connection location.

•Tubing should be long enough to extend to the front of the refrigerator. Allow enough tubing to accommodate bend leading into the water line connection.

NOTE: The only GE approved plastic tubing is supplied in the GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Other types of plastic may crack or rupture with age and cause water damage to your home.

GE SmartConnect™ Refrigerator Tubing Kits are available in the following lengths:

2' (.6 m) WX08X10002 6' (1.8 m) WX08X10006 15' (4.6 m) WX08X10015 25' (7.6 m) WX08X10025

Shut off the main water supply.

Turn on the nearest faucet long enough to clear the line of water.

•Install a shut-off valve between the icemaker water valve and cold water pipe in a basement or cabinet. The shut-off valve should be located where it will be easily accessible.

•Support blocks on the bottom of the refrigeration case must be removed before the refrigerator is taken off the skid or damage will occur. Carefully, tilt refrigerator and slide blocks out from beneath.

•Remove toekick. Set aside for final installation.

•Lift the refrigerator off the skid with an appliance dolly. Handle from the sides.

Floor

Copper Tubing

Compression Nut

Saddle Type

Shutoff Valve

Packing Nut

Outlet Valve

Ferrule (Sleeve)

NOTE: It is best to install the valve into a vertical water pipe. If you install the valve into a horizontal water pipe, make the connection at the top or side to avoid drawing off any sediment from the water pipe.

•Drill a 1/4" hole in the water pipe.

•Fasten the shut-off valve to the pipe with pipe clamp.

•Tighten the clamp screws until the sealing washer begins to swell. Do not overtighten.

•Place a compression nut and ferrule (sleeve) onto the end of the tubing and connect it to the shut-off valve. Make sure the tubing is fully inserted into the valve and ferrule is tightened.

ZICS360 LH specifications

The GE Monogram ZICS360 LH is a premium refrigerator that epitomizes luxury and advanced technology in modern kitchen design. This impressive appliance is engineered to meet the needs of discerning homeowners who seek both form and function in their kitchen spaces.

One of the most notable features of the ZICS360 LH is its spacious interior. With a generous capacity, it offers ample storage for groceries, making it perfect for families or those who entertain frequently. The interior is designed with adjustable shelving that allows users to customize the layout to accommodate items of various sizes. Additionally, the refrigerator includes gallon door bins that provide convenient access to frequently used items, maximizing every inch of available space.

The ZICS360 LH is equipped with advanced temperature management technologies. Its PreciseCool system uses advanced sensors and algorithms to maintain consistent temperatures throughout the refrigerator and freezer compartments, ensuring that food stays fresh longer. This appliance also features an Advanced Cooling System that helps to circulate cold air efficiently, eliminating hotspots and keeping foods at optimal temperatures.

Another key characteristic of the ZICS360 LH is its stainless steel exterior, which is both stylish and durable. The sleek design complements any kitchen decor, and the finish resists fingerprints and smudges, maintaining a clean and polished look over time. Its flush installation capability allows it to blend seamlessly with cabinetry, enhancing the overall aesthetics of the kitchen.

The ZICS360 LH also showcases innovative technology such as a sophisticated ice and water dispensing system. This feature not only produces clear, restaurant-quality ice but also provides chilled water on demand. The water filtration system ensures that the water and ice are free of impurities, delivering crisp, refreshing results.

Furthermore, the refrigerator is designed with energy efficiency in mind. It meets or exceeds ENERGY STAR standards, making it an environmentally friendly choice for homeowners looking to reduce their energy consumption while enjoying top-tier performance.

In summary, the GE Monogram ZICS360 LH refrigerator combines luxury, functionality, and cutting-edge technology. With its spacious interior, precise temperature management, elegant design, and efficient performance, it sets a high standard for modern refrigeration, proving to be an essential addition to upscale kitchens.