GE Monogram ZICS360 LH specs

Design Guide

THE INSTALLATION SPACE

DIMENSIONS AND CLEARANCES

The finished

35-1/2"

Finished Width

Wall View

35"

Case Width

25-3/4" Framed Models

25-3/4" Stainless Steel Models

Case Depth

cutout width must be

35-1/2".

84-1/2" max

83-1/2" min

Finished

Opening

2-5/16"

10"

Electrical

Area

75" From

24" Cutout Depth

Floor to Bottom

of Electrical Area

Water Supply

*83-1/2" at Rear

*84" From Floor to Top Frame

36" Frame to Frame Width

*Shipping height. The refrigerator can be adjusted to fit into a cutout that is

83-1/2" min. to 84-1/2" max. height. Note that the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1” height adjustment.

3 1/2"

Water And Electrical Locations

Electrical and water supply must be located as shown.

The cutout depth must be 24"

The refrigerator will project forward, slightly beyond adjacent cabinetry, depending on your installation.

Cutout depth beneath a soffit:

When installed beneath a soffit, the soffit cannot exceed the 24" installation depth shown. The top case trim overlaps the bottom of the soffit.

Additional Specifications

•A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical must be located on rear wall as shown.

Note: GFI (ground fault interrupter) is not recommended.

•Water line can enter the opening through the floor or back wall. The water line should be 1/4" O.D. copper tubing or GE SmartConnect™ kit between the cold water line and water connection location, long enough to extend to the front of the refrigerator. Installation of an easily accessible shut-off valve in the water line is required.

Depth Including Handles:

26-7/8" Framed Models

27-3/4" Stainless Steel Models

Product Clearances

These refrigerators are equipped with a 2-position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

130° Door Swing

90° Door Swing

25"

Minimum

-7/8"

to Wall

Behind

Frame

36-3/4"

130°

90°

Allow 25" minimum clearance for a full

4" Minimum

to Wall

130° door swing. Allow 15" for pan removal.

4" minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.

See illustrations pages 4 and 5 to determine door swing interaction with adjacent cabinets or countertops.

ZUG2, ZUGSS2 Unified Grille Panel Kit

71-1/2" Finished Width

•If you are installing two refrigerators, side by side, the installation space must be 71-1/2" wide.

Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width.

•The water and electrical locations for each product must be located as shown.

•A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product.

2-5/16"Electrical 6"

10"

84-1/2" max 24" Cutout

83-1/2" min Depth Finished

Opening

5" Water Supply

26"

3-1/2"

24-3/16"

Wall View

10"

75" From

Floor to Bottom

of Electrical Area

Water Supply 5"

26"

3-1/2"

ZICS360 LH specifications

The GE Monogram ZICS360 LH is a premium refrigerator that epitomizes luxury and advanced technology in modern kitchen design. This impressive appliance is engineered to meet the needs of discerning homeowners who seek both form and function in their kitchen spaces.

One of the most notable features of the ZICS360 LH is its spacious interior. With a generous capacity, it offers ample storage for groceries, making it perfect for families or those who entertain frequently. The interior is designed with adjustable shelving that allows users to customize the layout to accommodate items of various sizes. Additionally, the refrigerator includes gallon door bins that provide convenient access to frequently used items, maximizing every inch of available space.

The ZICS360 LH is equipped with advanced temperature management technologies. Its PreciseCool system uses advanced sensors and algorithms to maintain consistent temperatures throughout the refrigerator and freezer compartments, ensuring that food stays fresh longer. This appliance also features an Advanced Cooling System that helps to circulate cold air efficiently, eliminating hotspots and keeping foods at optimal temperatures.

Another key characteristic of the ZICS360 LH is its stainless steel exterior, which is both stylish and durable. The sleek design complements any kitchen decor, and the finish resists fingerprints and smudges, maintaining a clean and polished look over time. Its flush installation capability allows it to blend seamlessly with cabinetry, enhancing the overall aesthetics of the kitchen.

The ZICS360 LH also showcases innovative technology such as a sophisticated ice and water dispensing system. This feature not only produces clear, restaurant-quality ice but also provides chilled water on demand. The water filtration system ensures that the water and ice are free of impurities, delivering crisp, refreshing results.

Furthermore, the refrigerator is designed with energy efficiency in mind. It meets or exceeds ENERGY STAR standards, making it an environmentally friendly choice for homeowners looking to reduce their energy consumption while enjoying top-tier performance.

In summary, the GE Monogram ZICS360 LH refrigerator combines luxury, functionality, and cutting-edge technology. With its spacious interior, precise temperature management, elegant design, and efficient performance, it sets a high standard for modern refrigeration, proving to be an essential addition to upscale kitchens.