Tamron IC-R10 Charging Ni-Cd batteries, Charging precautions, About Ni-Cd batteries

Page 12

2 Ni-Cd BATTERIES AND ACCESSORIES

■Charging Ni-Cd batteries

The supplied Ni-Cd batteries are rechargeable and can be charged approx. 300 times. Charge the batteries before first operating the receiver or when the batteries become ex- hausted.

If you want to be able to charge the batteries more than 300 times, the following points should be observed:

1.Avoid overcharging. The charging period should be less than 48 hours.

2.Use the batteries until they become almost completely ex- hausted under normal conditions. We recommend battery charging just after receiving becomes impossible.

■Charging precautions

NEVER attempt to charge dry cell batteries. This will cause internal liquid leakage and damage the receiver.

NEVER connect two or more chargers at the same time.

Charging may not occur under temperatures of 10°C (50°F) or over temperatures of 40°C (104°F).

■About Ni-Cd batteries

Ni-Cd battery life

If your Ni-Cd batteries seems to have no capacity even after being fully charged, completely discharge them by leaving the power ON overnight. Then, fully charge the Ni-Cd batteries again. If the Ni-Cd batteries still do not retain a charge (or very little), new batteries must be purchased.

Recycling information (U.S.A. only)

 

The product that you purchased contains

 

RBRC

RBRC

rechargeable batteries. The batteries are recy-

clable. At the end of their useful life, under vari-

 

 

Ni- Cd ous state and local laws, it may be illegal to

dispose of these batteries into the municipal waste stream. Call 1-800-8-BATTERY for battery recycling options in your area or contact your dealer.

7

Page 11 Page 13
Image 12
Page 11 Page 13
Contents IR10 Read ALL Instructions Carefully be Fore attempting to operate the receiverFollowing explicit definitions apply to this manual Accessories included with the receiver For U.S.A. onlyQ1 Antenna W1 Handstrap T1 Ni-Cd batteriesTable of Contents Operating Theory Panel Description Front and side panelsEmits the receive audio Adjusts the audio output level Top panelVaries the squelch threshold point for audio mute Varies the RF gain in LSB, USB and CW modesMemo VFO Easy VSC AT T Function displayAppears while the sleep timer is activated p Appears while the function Func switch is pushedAppears while in memory mode p Appears while in VFO mode pKeypad Secondary Function while pushing FuncMemory search function p Secondary Function while pushing Func Charging precautions Charging Ni-Cd batteriesAbout Ni-Cd batteries Battery installation Charging connectionsAccessory attachment AntennaBelt clip HandstrapSelecting VFO mode Turn power onAdjust the volume Basic OperationAdjust the squelch Adjust the RF gainSelect VFO mode What is squelch?Selecting a receive mode What are receive modes?Selecting a tuning step Call up the tuning step set modeSelect the tuning step What are tuning steps?Tuning a frequency via the keypad Select the frequencyEnter the frequency Tuning a frequency via the dial Select VFO mode and a receive modeTune a frequency Rotate Dial to change the fre- quencyDial select steps What are dial select steps?Push and hold FUNC, then rotate Dial What is the band scope function? Band scope functionPreparation Set band scope function While pushing FUNC, push 1BSCOPEAdjust volume Adjust squelchSelect the receive mode Select VFOUse the tuning dial Example 59.75 MHzExample 59.25 MHz Tune the stationListening example 2 airband broadcast in AM mode Enter a frequency of 118.0000 MHz* using the keypad p Example 118.00 MHz Example 118.925 MHzMemory Mode Selecting Memory modeSelect Memory mode What is memory mode?Selecting a Bank and memory channel Selecting a Bank channelSelecting a memory channel-1 Selecting a memory channel-2Bank and memory channel setting Setting other informationProgramming a memory channel ProgrammingSetting receive conditions Select VFO mode p Set the frequency and receive mode pWhile pushing FUNC, push V/MMW Set up Programming detailsProgramming details Data setting Programming the dataPush 0 and 7 to enter the mem- ory channel number While pushing FUNC, push V/MMW for 2 secSetting the frequency 1While pushing FUNC, push V/MMW to enter memory write modeSet the Bank and memory channel PushPush Edit to enter memory set- ting mode Rotate Dial or push 0 then 1 to select channelProgramming details Cont ModeamCopy to VFO mode What is the memory copy function?Memory copy Copy to the other memory channelCopying example 59.7500 MHz, WFM, A45 to VFOWhat is scanning? Scanning OperationRepeatedly scans operatable frequency range A01 A03 A04 A00 FM only A05 B00-R99 A07 A06Set receive mode Set the volume and squelch levelsBefore scanning Set the scan delay What is VSC?What is scan delay? Set the VSCFull scan Memory scanStart and stop the scan Program scan Start and stop scanningSelect program scan channel Auto memory write scan During auto-memory write scanning For your convenienceBank scan Select Bank scan and Bank numberWhile pushing FUNC, push 8BANK-S Mode select scan Select mode select scan and modeProgram skip setting Program skip setting ContMemory skip setting Skip functionSignavi function Set Signavi functionSelect scan type and start scanning 3Push Scan or CLR to stop scan- ningWhat is priority watch? Priority WatchTypes of priority watch A01A32 Into Priority Channel VFO Mode p or Memory mode p Program a priority channelSet Main frequency You want to programEasy Mode Easy mode operationSelect Easy mode Push Easy to select Easy mode AppearsAttenuator settings can be toggled on or OFF Edit FunctionMemory channel edit You can store the following items into a memory channelMemory channel edit flow chart A00Enter memory edit mode Set frequencySet channel names Enter channel Names via Keypad or by ro Tating DialSet receive mode and skip condition Rotate Dial to select receive modeSet attenuator condition Set Bank namesEasy mode channel edit Select or program a tuning stepProgram scan channel edit Set the start frequency for scan frequency rangeStart Freq Program scan or Easy mode channel edit Enter edit modeSet start frequency Set receive mode and tuning step Set scan delay timeRotate Dial to select scan delay time Push and hold Edit to enter the set contentsSET Mode What is SET mode?Entering SET mode Opening messageBeep audio Display contrastPower save Backlight ConditionProgram skip Memory skipScan delay CI-V addressCI-V baud CI-V transceiveLow battery indicator Setting AFCLow battery indicator activates when the installed batter Other FunctionsMonitor function Lock functionSet monitor Set lockATT function NB/ANL functionSet ATT Set NB/ANLSleep timer function User TS settingSet sleep timer Set tuning stepEnter memory search mode Memory search functionEnter memory channel names Enter memory channel names via the keypad or DialSearching Selecting a memory channelPush Scan to start memory channel search Push ENT to select a memory channelAuto mode and TS function Set auto modeSet auto TS Resetting the CPU Partial resetAll reset Set cloning mode and start cloning Data cloningConnect an optional OPC-474 be Tween both SP jacks Alphanumeric KEY Assignment Alphanumeric inputControl Commands Command tableData format Data areaPower supply 15VDC Computer Optional RS-232C CableTo CI-V Troubleshooting Problem Possible Cause SolutionTroubleshooting Specifications GeneralOptions Protects the receiver from everyday wear and tearAllows you to transfer data between receivers Kamihigashi, Hirano-ku, Osaka 547 Japan

IC-R10 specifications

The Tamron IC-R10 is a notable innovation in the realm of imaging technology, exemplifying high performance and versatility in a compact design. As a part of Tamron's expanding lineup of digital products, the IC-R10 is tailored for those who demand excellent image quality and advanced features in one package.

One of the standout attributes of the Tamron IC-R10 is its high-resolution imaging sensor. This sensor boasts impressive pixel density, allowing users to capture stunningly detailed images across various settings. Whether you are shooting landscapes or portraits, the clarity and vibrancy provided by the IC-R10 elevate any shot. The advanced noise reduction capabilities ensure that even images taken in low light situations maintain their quality, minimizing grain while preserving fine details.

The IC-R10 incorporates sophisticated autofocus technology, which features fast and reliable phase detection. This enables instantaneous focusing on subjects, even during dynamic shooting events like sports or wildlife photography. The autofocus system is designed for accuracy, allowing users to capture fleeting moments without compromising focus.

Additionally, the IC-R10 features an extensive array of shooting modes, giving photographers the flexibility to explore their creativity. From manual settings for seasoned professionals to various automatic modes for beginners, the camera caters to a broad spectrum of users. The inclusion of advanced video recording capabilities also allows video enthusiasts to produce high-quality footage, reinforced by stabilization technology that minimizes shakiness and ensures smooth playback.

Another key highlight is the robust connectivity options of the Tamron IC-R10. With built-in Wi-Fi and Bluetooth, it allows for seamless sharing and remote control functionality via smart devices. Photographers can quickly upload their images to social media or transfer files to computers without the hassle of cables, making it ideal for on-the-go shooting.

Design-wise, the Tamron IC-R10 features an ergonomic build that is both lightweight and durable. Its weather-sealed body adds an extra layer of protection against the elements, making it a reliable choice for outdoor adventures.

In conclusion, the Tamron IC-R10 represents a well-rounded offering that combines advanced technologies and user-friendly features. Its high-resolution imaging capabilities, fast autofocus system, versatile shooting modes, and robust connectivity options make it a compelling choice for both amateur and professional photographers alike. Whether you are capturing breathtaking landscapes or everyday moments, the IC-R10 is sure to impress.
Top Page Image Contents