Tamron IC-R10 Band scope function, Preparation, What is the band scope function?

Page 22

3 BASIC OPERATION

■Band scope function

What is the band scope function?

The band scope detects signal availability in the range of ±5 channels (up to ±100 kHz) from the displayed frequency, and displays the result on the multi function dot-matrix display. This gives you a visual reference of current band conditions.

In this case, channel refers to sweep step or channel space according to the set tuning step. For example, when the tun- ing step is set to 5 kHz, the band scope detects 25 kHz above and below the displayed frequency, then displays the result on the LCD.

When the tuning step is set above 20 kHz, the band scope function automatically changes its sweep step to 20 kHz. However, when the sweep step is changed to 20 kHz, the tuning step remains the same.

Also, when a user-programmable tuning step is selected, the band scope function automatically selects the 20 kHz sweep step.

Preparation

The band scope function is activated only when FM receive mode is selected in VFO mode.

qPush [V/M] to select VFO mode. (p. 11)

wPush [MODE] one or more times to select FM mode. (p. 12)

eWhile pushing [FUNC], push [(MODE)TS]

rRotate [DIAL] to select the tuning/sweep step. t Push [CLR] to return to VFO mode.

4

3

235

1

17

Page 21 Page 23
Image 22
Page 21 Page 23
Contents IR10 Fore attempting to operate the receiver Read ALL Instructions Carefully beFollowing explicit definitions apply to this manual Q1 Antenna W1 Handstrap Accessories included with the receiverFor U.S.A. only T1 Ni-Cd batteriesTable of Contents Operating Theory Front and side panels Panel DescriptionEmits the receive audio Varies the squelch threshold point for audio mute Adjusts the audio output levelTop panel Varies the RF gain in LSB, USB and CW modesMemo VFO Easy VSC AT T Function displayAppears while in memory mode p Appears while the sleep timer is activated pAppears while the function Func switch is pushed Appears while in VFO mode pSecondary Function while pushing Func KeypadMemory search function p Secondary Function while pushing Func Charging Ni-Cd batteries Charging precautionsAbout Ni-Cd batteries Battery installation Charging connectionsBelt clip Accessory attachmentAntenna HandstrapAdjust the volume Selecting VFO modeTurn power on Basic OperationSelect VFO mode Adjust the squelchAdjust the RF gain What is squelch?Selecting a receive mode What are receive modes?Select the tuning step Selecting a tuning stepCall up the tuning step set mode What are tuning steps?Select the frequency Tuning a frequency via the keypadEnter the frequency Tune a frequency Tuning a frequency via the dialSelect VFO mode and a receive mode Rotate Dial to change the fre- quencyWhat are dial select steps? Dial select stepsPush and hold FUNC, then rotate Dial Band scope function What is the band scope function?Preparation Set band scope function While pushing FUNC, push 1BSCOPESelect the receive mode Adjust volumeAdjust squelch Select VFOExample 59.25 MHz Use the tuning dialExample 59.75 MHz Tune the stationListening example 2 airband broadcast in AM mode Enter a frequency of 118.0000 MHz* using the keypad p Example 118.00 MHz Example 118.925 MHzSelect Memory mode Memory ModeSelecting Memory mode What is memory mode?Selecting a memory channel-1 Selecting a Bank and memory channelSelecting a Bank channel Selecting a memory channel-2Programming a memory channel Bank and memory channel settingSetting other information ProgrammingSelect VFO mode p Set the frequency and receive mode p Setting receive conditionsWhile pushing FUNC, push V/MMW Set up Programming detailsProgramming details Push 0 and 7 to enter the mem- ory channel number Data settingProgramming the data While pushing FUNC, push V/MMW for 2 secSet the Bank and memory channel Setting the frequency1While pushing FUNC, push V/MMW to enter memory write mode PushPush Edit to enter memory set- ting mode Rotate Dial or push 0 then 1 to select channelProgramming details Cont ModeamMemory copy Copy to VFO modeWhat is the memory copy function? Copy to the other memory channelCopying example 59.7500 MHz, WFM, A45 to VFOScanning Operation What is scanning?Repeatedly scans operatable frequency range A01 A03 A04 A00 FM only A05 B00-R99 A07 A06Set the volume and squelch levels Set receive modeBefore scanning What is scan delay? Set the scan delayWhat is VSC? Set the VSCMemory scan Full scanStart and stop the scan Start and stop scanning Program scanSelect program scan channel Auto memory write scan During auto-memory write scanning For your convenienceSelect Bank scan and Bank number Bank scanWhile pushing FUNC, push 8BANK-S Mode select scan Select mode select scan and modeMemory skip setting Program skip settingProgram skip setting Cont Skip functionSelect scan type and start scanning Signavi functionSet Signavi function 3Push Scan or CLR to stop scan- ningPriority Watch What is priority watch?Types of priority watch A01A32 Set Main frequency Into Priority Channel VFO Mode p or Memory mode pProgram a priority channel You want to programSelect Easy mode Easy ModeEasy mode operation Push Easy to select Easy mode AppearsMemory channel edit Attenuator settings can be toggled on or OFFEdit Function You can store the following items into a memory channelMemory channel edit flow chart A00Set channel names Enter memory edit modeSet frequency Enter channel Names via Keypad or by ro Tating DialSet attenuator condition Set receive mode and skip conditionRotate Dial to select receive mode Set Bank namesProgram scan channel edit Easy mode channel editSelect or program a tuning step Set the start frequency for scan frequency rangeStart Freq Enter edit mode Program scan or Easy mode channel editSet start frequency Rotate Dial to select scan delay time Set receive mode and tuning stepSet scan delay time Push and hold Edit to enter the set contentsSET Mode What is SET mode?Beep audio Entering SET modeOpening message Display contrastProgram skip Power saveBacklight Condition Memory skipCI-V baud Scan delayCI-V address CI-V transceiveLow battery indicator activates when the installed batter Low battery indicatorSetting AFC Other FunctionsSet monitor Monitor functionLock function Set lockSet ATT ATT functionNB/ANL function Set NB/ANLSet sleep timer Sleep timer functionUser TS setting Set tuning stepEnter memory channel names Enter memory search modeMemory search function Enter memory channel names via the keypad or DialPush Scan to start memory channel search SearchingSelecting a memory channel Push ENT to select a memory channelSet auto mode Auto mode and TS functionSet auto TS Partial reset Resetting the CPUAll reset Data cloning Set cloning mode and start cloningConnect an optional OPC-474 be Tween both SP jacks Alphanumeric KEY Assignment Alphanumeric inputData format Control CommandsCommand table Data areaRS-232C Cable Power supply 15VDC Computer OptionalTo CI-V Troubleshooting Problem Possible Cause SolutionTroubleshooting Specifications GeneralProtects the receiver from everyday wear and tear OptionsAllows you to transfer data between receivers Kamihigashi, Hirano-ku, Osaka 547 Japan

IC-R10 specifications

The Tamron IC-R10 is a notable innovation in the realm of imaging technology, exemplifying high performance and versatility in a compact design. As a part of Tamron's expanding lineup of digital products, the IC-R10 is tailored for those who demand excellent image quality and advanced features in one package.

One of the standout attributes of the Tamron IC-R10 is its high-resolution imaging sensor. This sensor boasts impressive pixel density, allowing users to capture stunningly detailed images across various settings. Whether you are shooting landscapes or portraits, the clarity and vibrancy provided by the IC-R10 elevate any shot. The advanced noise reduction capabilities ensure that even images taken in low light situations maintain their quality, minimizing grain while preserving fine details.

The IC-R10 incorporates sophisticated autofocus technology, which features fast and reliable phase detection. This enables instantaneous focusing on subjects, even during dynamic shooting events like sports or wildlife photography. The autofocus system is designed for accuracy, allowing users to capture fleeting moments without compromising focus.

Additionally, the IC-R10 features an extensive array of shooting modes, giving photographers the flexibility to explore their creativity. From manual settings for seasoned professionals to various automatic modes for beginners, the camera caters to a broad spectrum of users. The inclusion of advanced video recording capabilities also allows video enthusiasts to produce high-quality footage, reinforced by stabilization technology that minimizes shakiness and ensures smooth playback.

Another key highlight is the robust connectivity options of the Tamron IC-R10. With built-in Wi-Fi and Bluetooth, it allows for seamless sharing and remote control functionality via smart devices. Photographers can quickly upload their images to social media or transfer files to computers without the hassle of cables, making it ideal for on-the-go shooting.

Design-wise, the Tamron IC-R10 features an ergonomic build that is both lightweight and durable. Its weather-sealed body adds an extra layer of protection against the elements, making it a reliable choice for outdoor adventures.

In conclusion, the Tamron IC-R10 represents a well-rounded offering that combines advanced technologies and user-friendly features. Its high-resolution imaging capabilities, fast autofocus system, versatile shooting modes, and robust connectivity options make it a compelling choice for both amateur and professional photographers alike. Whether you are capturing breathtaking landscapes or everyday moments, the IC-R10 is sure to impress.
Top Page Image Contents