Tamron IC-R10 Adjust the squelch, Adjust the RF gain, Select VFO mode, What is squelch?

Page 16

3 BASIC OPERATION

3. Adjust the squelch

Rotate [SQL] maximum counter- clockwise, then rotate it clockwise until audio is just muted when receiv- ing no signal for FM, WFM or AM mode. (see right page)

What is squelch?

A squelch circuit allows you to mute undesired noise while receiving no signal and emit audio while receiving signals. This provides quiet standby. The [MONI] switch changes the squelch setting. This is useful for weak signal reception (p. 64).

3-1. Adjust the RF gain

Rotate [SQL] maximum counter- clockwise, to adjust RF gain to opti- mum level.

What is RF gain?

RF gain controls receive sensitivity gain— reduce the gain when you don’t want to receive very weak sig- nals or when excessively strong in- terfering signals are being received, etc.

4. Select VFO mode

When MEMORY mode is selected, push [V/M] to select VFO mode. When SET or TS set mode is se- lected, push [CLR] to select VFO mode.

• The VFO indicator appears.

VFO indicator

VFO

144.0000

Image 16

Contents IR10 Fore attempting to operate the receiver Read ALL Instructions Carefully beFollowing explicit deﬁnitions apply to this manual Accessories included with the receiver For U.S.A. onlyQ1 Antenna W1 Handstrap T1 Ni-Cd batteriesTable of Contents Operating Theory Front and side panels Panel DescriptionEmits the receive audio Adjusts the audio output level Top panelVaries the squelch threshold point for audio mute Varies the RF gain in LSB, USB and CW modesMemo VFO Easy VSC AT T Function displayAppears while the sleep timer is activated p Appears while the function Func switch is pushedAppears while in memory mode p Appears while in VFO mode pSecondary Function while pushing Func KeypadMemory search function p Secondary Function while pushing Func Charging Ni-Cd batteries Charging precautionsAbout Ni-Cd batteries Battery installation Charging connectionsAccessory attachment AntennaBelt clip HandstrapSelecting VFO mode Turn power onAdjust the volume Basic OperationAdjust the squelch Adjust the RF gainSelect VFO mode What is squelch?Selecting a receive mode What are receive modes?Selecting a tuning step Call up the tuning step set modeSelect the tuning step What are tuning steps?Select the frequency Tuning a frequency via the keypadEnter the frequency Tuning a frequency via the dial Select VFO mode and a receive modeTune a frequency Rotate Dial to change the fre- quencyWhat are dial select steps? Dial select stepsPush and hold FUNC, then rotate Dial Band scope function What is the band scope function?Preparation Set band scope function While pushing FUNC, push 1BSCOPEAdjust volume Adjust squelchSelect the receive mode Select VFOUse the tuning dial Example 59.75 MHzExample 59.25 MHz Tune the stationListening example 2 airband broadcast in AM mode Enter a frequency of 118.0000 MHz* using the keypad p Example 118.00 MHz Example 118.925 MHzMemory Mode Selecting Memory modeSelect Memory mode What is memory mode?Selecting a Bank and memory channel Selecting a Bank channelSelecting a memory channel-1 Selecting a memory channel-2Bank and memory channel setting Setting other informationProgramming a memory channel ProgrammingSelect VFO mode p Set the frequency and receive mode p Setting receive conditionsWhile pushing FUNC, push V/MMW Set up Programming detailsProgramming details Data setting Programming the dataPush 0 and 7 to enter the mem- ory channel number While pushing FUNC, push V/MMW for 2 secSetting the frequency 1While pushing FUNC, push V/MMW to enter memory write modeSet the Bank and memory channel PushPush Edit to enter memory set- ting mode Rotate Dial or push 0 then 1 to select channelProgramming details Cont ModeamCopy to VFO mode What is the memory copy function?Memory copy Copy to the other memory channelCopying example 59.7500 MHz, WFM, A45 to VFOScanning Operation What is scanning?Repeatedly scans operatable frequency range A01 A03 A04 A00 FM only A05 B00-R99 A07 A06Set the volume and squelch levels Set receive modeBefore scanning Set the scan delay What is VSC?What is scan delay? Set the VSCMemory scan Full scanStart and stop the scan Start and stop scanning Program scanSelect program scan channel Auto memory write scan During auto-memory write scanning For your convenienceSelect Bank scan and Bank number Bank scanWhile pushing FUNC, push 8BANK-S Mode select scan Select mode select scan and modeProgram skip setting Program skip setting ContMemory skip setting Skip functionSignavi function Set Signavi functionSelect scan type and start scanning 3Push Scan or CLR to stop scan- ningPriority Watch What is priority watch?Types of priority watch A01A32 Into Priority Channel VFO Mode p or Memory mode p Program a priority channelSet Main frequency You want to programEasy Mode Easy mode operationSelect Easy mode Push Easy to select Easy mode AppearsAttenuator settings can be toggled on or OFF Edit FunctionMemory channel edit You can store the following items into a memory channelMemory channel edit ﬂow chart A00Enter memory edit mode Set frequencySet channel names Enter channel Names via Keypad or by ro Tating DialSet receive mode and skip condition Rotate Dial to select receive modeSet attenuator condition Set Bank namesEasy mode channel edit Select or program a tuning stepProgram scan channel edit Set the start frequency for scan frequency rangeStart Freq Enter edit mode Program scan or Easy mode channel editSet start frequency Set receive mode and tuning step Set scan delay timeRotate Dial to select scan delay time Push and hold Edit to enter the set contentsSET Mode What is SET mode?Entering SET mode Opening messageBeep audio Display contrastPower save Backlight ConditionProgram skip Memory skipScan delay CI-V addressCI-V baud CI-V transceiveLow battery indicator Setting AFCLow battery indicator activates when the installed batter Other FunctionsMonitor function Lock functionSet monitor Set lockATT function NB/ANL functionSet ATT Set NB/ANLSleep timer function User TS settingSet sleep timer Set tuning stepEnter memory search mode Memory search functionEnter memory channel names Enter memory channel names via the keypad or DialSearching Selecting a memory channelPush Scan to start memory channel search Push ENT to select a memory channelSet auto mode Auto mode and TS functionSet auto TS Partial reset Resetting the CPUAll reset Data cloning Set cloning mode and start cloningConnect an optional OPC-474 be Tween both SP jacks Alphanumeric KEY Assignment Alphanumeric inputControl Commands Command tableData format Data areaRS-232C Cable Power supply 15VDC Computer OptionalTo CI-V Troubleshooting Problem Possible Cause SolutionTroubleshooting Specifications GeneralProtects the receiver from everyday wear and tear OptionsAllows you to transfer data between receivers Kamihigashi, Hirano-ku, Osaka 547 Japan

IC-R10 specifications

The Tamron IC-R10 is a notable innovation in the realm of imaging technology, exemplifying high performance and versatility in a compact design. As a part of Tamron's expanding lineup of digital products, the IC-R10 is tailored for those who demand excellent image quality and advanced features in one package.

One of the standout attributes of the Tamron IC-R10 is its high-resolution imaging sensor. This sensor boasts impressive pixel density, allowing users to capture stunningly detailed images across various settings. Whether you are shooting landscapes or portraits, the clarity and vibrancy provided by the IC-R10 elevate any shot. The advanced noise reduction capabilities ensure that even images taken in low light situations maintain their quality, minimizing grain while preserving fine details.

The IC-R10 incorporates sophisticated autofocus technology, which features fast and reliable phase detection. This enables instantaneous focusing on subjects, even during dynamic shooting events like sports or wildlife photography. The autofocus system is designed for accuracy, allowing users to capture fleeting moments without compromising focus.

Additionally, the IC-R10 features an extensive array of shooting modes, giving photographers the flexibility to explore their creativity. From manual settings for seasoned professionals to various automatic modes for beginners, the camera caters to a broad spectrum of users. The inclusion of advanced video recording capabilities also allows video enthusiasts to produce high-quality footage, reinforced by stabilization technology that minimizes shakiness and ensures smooth playback.

Another key highlight is the robust connectivity options of the Tamron IC-R10. With built-in Wi-Fi and Bluetooth, it allows for seamless sharing and remote control functionality via smart devices. Photographers can quickly upload their images to social media or transfer files to computers without the hassle of cables, making it ideal for on-the-go shooting.

Design-wise, the Tamron IC-R10 features an ergonomic build that is both lightweight and durable. Its weather-sealed body adds an extra layer of protection against the elements, making it a reliable choice for outdoor adventures.

In conclusion, the Tamron IC-R10 represents a well-rounded offering that combines advanced technologies and user-friendly features. Its high-resolution imaging capabilities, fast autofocus system, versatile shooting modes, and robust connectivity options make it a compelling choice for both amateur and professional photographers alike. Whether you are capturing breathtaking landscapes or everyday moments, the IC-R10 is sure to impress.