Tamron IC-R10 instruction manual Troubleshooting

Page 81

TROUBLESHOOTING 13

PROBLEM

POSSIBLE CAUSE

SOLUTION

REF.

 

 

 

 

Cannot start scanning.

• [SQL] is rotated too far clockwise.

• Rotate [SQL] counterclockwise.

p. 11

 

• Incorrect receive mode (LSB, USB or CW) is se-

• Set receive mode to one of FM, WFM or AM.

p. 12

 

lected.

 

 

 

• Scan edges are set to the same frequencies.

• Set scan edges to different frequencies.

p. 57

 

• 2 or more memory channels have not been pro-

• Program 2 or more memory channels.

pgs. 25,

 

grammed.

 

26, 27

 

• No channels have been programmed with the se-

• Program at least 2 channels with the selected re-

 

 

lected receive mode (when using mode select

ceive mode.

pgs. 25,

 

scan).

 

26, 27

 

 

 

 

Cannot recall memory

• Wrong operating mode is selected.

• Push [V/M] to select memory mode.

p. 23

channels.

 

 

 

 

 

 

 

WFM signal is distorted.

• Not tuned to the proper frequency.

• Set the frequency 30–50 kHz less.

p. 20

 

 

 

 

76

Page 80 Page 82
Image 81
Page 80 Page 82
Contents IR10 Read ALL Instructions Carefully be Fore attempting to operate the receiverFollowing explicit definitions apply to this manual For U.S.A. only Accessories included with the receiverQ1 Antenna W1 Handstrap T1 Ni-Cd batteriesTable of Contents Operating Theory Panel Description Front and side panelsEmits the receive audio Top panel Adjusts the audio output levelVaries the squelch threshold point for audio mute Varies the RF gain in LSB, USB and CW modesFunction display Memo VFO Easy VSC AT TAppears while the function Func switch is pushed Appears while the sleep timer is activated pAppears while in memory mode p Appears while in VFO mode pKeypad Secondary Function while pushing FuncMemory search function p Secondary Function while pushing Func Charging precautions Charging Ni-Cd batteriesAbout Ni-Cd batteries Charging connections Battery installationAntenna Accessory attachmentBelt clip HandstrapTurn power on Selecting VFO modeAdjust the volume Basic OperationAdjust the RF gain Adjust the squelchSelect VFO mode What is squelch?What are receive modes? Selecting a receive modeCall up the tuning step set mode Selecting a tuning stepSelect the tuning step What are tuning steps?Tuning a frequency via the keypad Select the frequencyEnter the frequency Select VFO mode and a receive mode Tuning a frequency via the dialTune a frequency Rotate Dial to change the fre- quencyDial select steps What are dial select steps?Push and hold FUNC, then rotate Dial What is the band scope function? Band scope functionPreparation While pushing FUNC, push 1BSCOPE Set band scope functionAdjust squelch Adjust volumeSelect the receive mode Select VFOExample 59.75 MHz Use the tuning dialExample 59.25 MHz Tune the stationListening example 2 airband broadcast in AM mode Example 118.00 MHz Example 118.925 MHz Enter a frequency of 118.0000 MHz* using the keypad pSelecting Memory mode Memory ModeSelect Memory mode What is memory mode?Selecting a Bank channel Selecting a Bank and memory channelSelecting a memory channel-1 Selecting a memory channel-2Setting other information Bank and memory channel settingProgramming a memory channel ProgrammingSetting receive conditions Select VFO mode p Set the frequency and receive mode pWhile pushing FUNC, push V/MMW Programming details Set upProgramming details Programming the data Data settingPush 0 and 7 to enter the mem- ory channel number While pushing FUNC, push V/MMW for 2 sec1While pushing FUNC, push V/MMW to enter memory write mode Setting the frequencySet the Bank and memory channel PushRotate Dial or push 0 then 1 to select channel Push Edit to enter memory set- ting modeModeam Programming details ContWhat is the memory copy function? Copy to VFO modeMemory copy Copy to the other memory channel59.7500 MHz, WFM, A45 to VFO Copying exampleWhat is scanning? Scanning OperationRepeatedly scans operatable frequency range A00 FM only A05 B00-R99 A07 A06 A01 A03 A04Set receive mode Set the volume and squelch levelsBefore scanning What is VSC? Set the scan delayWhat is scan delay? Set the VSCFull scan Memory scanStart and stop the scan Program scan Start and stop scanningSelect program scan channel Auto memory write scan For your convenience During auto-memory write scanningBank scan Select Bank scan and Bank numberWhile pushing FUNC, push 8BANK-S Select mode select scan and mode Mode select scanProgram skip setting Cont Program skip settingMemory skip setting Skip functionSet Signavi function Signavi functionSelect scan type and start scanning 3Push Scan or CLR to stop scan- ningWhat is priority watch? Priority WatchTypes of priority watch A01A32 Program a priority channel Into Priority Channel VFO Mode p or Memory mode pSet Main frequency You want to programEasy mode operation Easy ModeSelect Easy mode Push Easy to select Easy mode AppearsEdit Function Attenuator settings can be toggled on or OFFMemory channel edit You can store the following items into a memory channelA00 Memory channel edit flow chartSet frequency Enter memory edit modeSet channel names Enter channel Names via Keypad or by ro Tating DialRotate Dial to select receive mode Set receive mode and skip conditionSet attenuator condition Set Bank namesSelect or program a tuning step Easy mode channel editProgram scan channel edit Set the start frequency for scan frequency rangeStart Freq Program scan or Easy mode channel edit Enter edit modeSet start frequency Set scan delay time Set receive mode and tuning stepRotate Dial to select scan delay time Push and hold Edit to enter the set contentsWhat is SET mode? SET ModeOpening message Entering SET modeBeep audio Display contrastBacklight Condition Power saveProgram skip Memory skipCI-V address Scan delayCI-V baud CI-V transceiveSetting AFC Low battery indicatorLow battery indicator activates when the installed batter Other FunctionsLock function Monitor functionSet monitor Set lockNB/ANL function ATT functionSet ATT Set NB/ANLUser TS setting Sleep timer functionSet sleep timer Set tuning stepMemory search function Enter memory search modeEnter memory channel names Enter memory channel names via the keypad or DialSelecting a memory channel SearchingPush Scan to start memory channel search Push ENT to select a memory channelAuto mode and TS function Set auto modeSet auto TS Resetting the CPU Partial resetAll reset Set cloning mode and start cloning Data cloningConnect an optional OPC-474 be Tween both SP jacks Alphanumeric input Alphanumeric KEY AssignmentCommand table Control CommandsData format Data areaPower supply 15VDC Computer Optional RS-232C CableTo CI-V Problem Possible Cause Solution TroubleshootingTroubleshooting General SpecificationsOptions Protects the receiver from everyday wear and tearAllows you to transfer data between receivers Kamihigashi, Hirano-ku, Osaka 547 Japan

IC-R10 specifications

The Tamron IC-R10 is a notable innovation in the realm of imaging technology, exemplifying high performance and versatility in a compact design. As a part of Tamron's expanding lineup of digital products, the IC-R10 is tailored for those who demand excellent image quality and advanced features in one package.

One of the standout attributes of the Tamron IC-R10 is its high-resolution imaging sensor. This sensor boasts impressive pixel density, allowing users to capture stunningly detailed images across various settings. Whether you are shooting landscapes or portraits, the clarity and vibrancy provided by the IC-R10 elevate any shot. The advanced noise reduction capabilities ensure that even images taken in low light situations maintain their quality, minimizing grain while preserving fine details.

The IC-R10 incorporates sophisticated autofocus technology, which features fast and reliable phase detection. This enables instantaneous focusing on subjects, even during dynamic shooting events like sports or wildlife photography. The autofocus system is designed for accuracy, allowing users to capture fleeting moments without compromising focus.

Additionally, the IC-R10 features an extensive array of shooting modes, giving photographers the flexibility to explore their creativity. From manual settings for seasoned professionals to various automatic modes for beginners, the camera caters to a broad spectrum of users. The inclusion of advanced video recording capabilities also allows video enthusiasts to produce high-quality footage, reinforced by stabilization technology that minimizes shakiness and ensures smooth playback.

Another key highlight is the robust connectivity options of the Tamron IC-R10. With built-in Wi-Fi and Bluetooth, it allows for seamless sharing and remote control functionality via smart devices. Photographers can quickly upload their images to social media or transfer files to computers without the hassle of cables, making it ideal for on-the-go shooting.

Design-wise, the Tamron IC-R10 features an ergonomic build that is both lightweight and durable. Its weather-sealed body adds an extra layer of protection against the elements, making it a reliable choice for outdoor adventures.

In conclusion, the Tamron IC-R10 represents a well-rounded offering that combines advanced technologies and user-friendly features. Its high-resolution imaging capabilities, fast autofocus system, versatile shooting modes, and robust connectivity options make it a compelling choice for both amateur and professional photographers alike. Whether you are capturing breathtaking landscapes or everyday moments, the IC-R10 is sure to impress.
Top Page Image Contents