![Remove Grilles for Access to Power Cord and Anti-tip Locking Hooks](/images/new-backgrounds/65069/6506935x1.webp)
36”
(cont.)
Remove Grilles for Access to Power Cord and Anti-tip Locking Hooks
Fresh Food Unit
•Open the access door.
•Using a 1/4" hex driver, remove the 2 screws at the bottom of the grille.
•Pull the bottom of the grille forward, down and out to remove.
Freezer Unit
•Open the access door.
•Using a 1/4" hex driver, remove the 2 screws at the bottom of the grille on the right.
•Pull the bottom of the grille forward, down and out to remove.
•Using a 1/4" hex driver, remove the screw on the left side of the grille.
•The grille is aluminum and will bend easily. Gently pull forward on the left side of the grille to open for access. This grille will not be completely removed.
Power Cord
Locate the power cord inside the left cavity. If it has not been adjusted so the plug is easily accessible, do so now.
Move Unit into Final Position
•Move refrigerator toward its final installed location. Align the tabs on the wall bracket with the openings in the back of the unit.
•The unit has “L” bolts in the upper left and right corners inside of the access compartment. These bolts will interlock with the wall bracket and secure the unit using the washers and hair pin cotters in the hardware kit once the unit has been leveled and is in the final position.
Screws |
Screws |
“L” Bolt
Left Grille Open |
Power Cord Location
18