English
CLEANING AND MAINTENANCE
Before using your ice maker, it is strongly recommended that you clean the appliance thoroughly. Be sure to clean the ice maker regularly.
1.When cleaning, please make sure the power has been turned off and the plug is disconnected from the outlet. When plugging or unplugging the unit from the outlet, pull directly on the plug. Never pull on the power cord.
2.Remove the ice storage basket.
3. Drain remaining water from unit. Remove the cap, then the rubber plug from the spout. When assembling back together, the rubber plug must be inserted first into the spout, and then capped. Otherwise, the ice maker will leak.
4.Use a mild detergent diluted in warm water and wipe with a soft towel or sponge.
Solvents, detergents and abrasives must never be used for cleaning.
5.Wipe the inner parts, such as the ice storage basket,
water reservoir, water box, ice pusher, and evaporator rods.
6.The outside of the appliance should be cleaned regularly with a mild detergent solution, warm water, and a soft cloth.
7.Dry the interior and exterior with a soft cloth.
8.To begin making ice once the unit has been cleaned, pour clean water into the water reservoir and fill up to the level line follow operating instructions.
Never tilt or place the appliance on its side, otherwise you must wait 10 hours for compressor coolant to settle.
9.To ensure the cleanliness of the ice cubes, the water in the water storage tank should be replaced every 24 hours.
10.When the machine is not in use or will not be used for an
extended period of time, unscrew the drain cap, then remove the rubber plug behind the unit to empty the remaining water in the water reservoir completely. (Follow the instructions in number 3 above.)
Drain Cap | Drain Spout |
|
Rubber Plug
Drain Spout
10