Operating Instructions

English

This portable ice maker uses a fully automatic control system, with an advanced microcomputer for easy and convenient ice making. Making ice is simple and fast. Just add water, plug into an outlet, and press the ON button. You can select one of the three ice cube sizes with the touch of a button. When ﬁrst turning on the unit or during icemaking cycles, the compressor will stay idle for 3 minutes, while energizing.

There are warning indicators that alert you to ﬁll water when the reservoir is empty and to remove ice when the storage basket is full. The ice maker also has built-in safeguards that can limit accidental damage, automatically shutting down the system when necessary.

Pre-Operating Instructions

Please read carefully.

1.The tilted angle of the ice maker cabinet should not exceed 45˚ during transportation or use. Do not turn the appliance upside down.

Doing so could cause the compressor or refrigerating system to operate incorrectly. When the ice maker is moved or transported, please allow time for the ﬂuids in the compressor to settle. Before using the ice maker for the ﬁrst time, please wait 2 hours after the unit has been leveled and positioned in its proper place before plugging it in and turning it on.

2.Please ensure the ice maker is level and on a stable table or platform to avoid malfunction.

3.The machine must be placed on a dry and level surface with sufﬁcient ventilation, far from heat sources such as ovens, heaters and corrosive gases. Leave an 8" (20 cm) clearance on all sides of the ice maker for proper ventilation.

4.Do not ﬁll the water reservoir with hot water. This may damage the ice maker. It is best to ﬁll the water reservoir with water of room temperature or lower.