Jackson Drive Motor & Gear Reducer, 07610-003-08-78 A specs

www.jacksonmsc.com

6. Once the bolts are removed, the motor should slide out of the gear reducer. Remember to support and lay it gently on the floor or some other surface in order to continue working on it. Be sure that you get the key, checking the keyway on the motor shaft and in the gear reducer.

Removing the nuts securing the bottom cover.

4.Remove the bottom and set to the side so that it does not become a trip hazard.

Removing the drive motor.

7. If the purpose of this maintenance action is to replace the drive motor, continue to step 8. If you wish to replace the gear reducer, continue to step 21.

8. With the motor laying on a level surface, you need to remove the conduit from it. First, use the 1/4” nutdriver to remove the wiring access cover on the back of the motor.

Removing the bottom cover.

5.With the cover removed you may now remove the bolts used to connect the drive motor to the gear reducer. Note: you need to support the motor as you remove the bolts; failure to do so could result in the motor falling to the ground and becoming damaged.

Removing the wiring access cover.

9. Once the cover is removed and the wiring is exposed, you may want jot down how your motor is wired. You can also refer to the schematic located on the motor itself because how the motor is wired when you remove it is how you will wire it when you replace it. If you have any questions regarding the wiring of your motor, do not hesitate to contact Jackson Technical Service.

10. pull the bundled wires out and remove the wire nuts. Set the wire nuts to the side as you will need them when you wire up the new motor.

Removing the bolts holding the drive motor to the gear reducer.

	Rack Conveyor Drive Motor and Gear Reducer Replacement Instructions	3
	Revision A (07/05/2005)	3
	Revision A (07/05/2005)

07610-003-08-78 A, Drive Motor & Gear Reducer specifications

The Jackson Drive Motor & Gear Reducer, model number 07610-003-08-78 A, is a highly engineered component designed for diverse industrial applications, renowned for its reliability and efficiency. This gear reducer integrates advanced technologies and robust features that make it a favored choice for enhancing performance in various motor-driven systems.

One of the key features of the Jackson Drive Motor & Gear Reducer is its high torque output, enabling it to handle demanding workloads effortlessly. This capacity makes it suitable for heavy-duty applications, including conveyors, mixers, and other machinery that require substantial force to operate. The gear reducer is constructed with precision gears that optimize torque multiplication, ensuring smooth and effective power transmission.

The design of Jackson Drive Motor & Gear Reducer prioritizes durability and longevity. Crafted from high-quality materials, it exhibits significant resistance to wear and tear, prolonging its operational life even in challenging environments. This resilience is complemented by effective heat dissipation mechanisms that prevent overheating during extended use, thereby maintaining consistent performance levels.

In terms of technology, the Jackson Drive incorporates sophisticated gearing techniques such as helical or bevel gears, which reduce backlash and enhance the precision of operation. These gears contribute to quieter performance, making the reducer suitable for applications where noise minimization is crucial. Additionally, the device is designed to minimize vibration, further enhancing operational stability.

Another standout characteristic of the Jackson Drive Motor & Gear Reducer is its compact design. Its space-saving dimensions make it easy to integrate into existing machinery without requiring extensive modifications. Despite its small footprint, the gear reducer does not compromise on performance, providing efficient power management and energy savings.

Moreover, the Jackson Drive Motor & Gear Reducer allows for easy maintenance. The design features accessible points for lubrication and inspection, simplifying routine checks and enhancing usability. This aspect reduces downtime and ensures that the equipment remains in optimal working condition.

In summary, the Jackson Drive Motor & Gear Reducer, model 07610-003-08-78 A, stands out due to its high torque capability, durability, advanced gearing technologies, compact design, and ease of maintenance. These features make it an essential component in various industrial applications, helping to enhance efficiency and reliability across numerous systems.