Keating Of Chicago 2006 Installation, Damage During Shipment, Leveling, Restraining Devices

Page 5

INSTALLATION

This fryer MUST be installed, inspected, calibrated and serviced by qualified and/or certified and/or licensed service personnel - you may void your Keating warranty if installation is not completed per local, national and Keating specifications. Contact your dealer for assistance.

DAMAGE DURING SHIPMENT

The fryer has been assembled, tested and inspected at the factory. Upon arrival, the complete fryer should be checked for any damage that may have occurred during shipment.

The carrier is responsible for all damage in transit whether visible or concealed. Do not pay for the freight bill or sign the Bill of Lading until the fryer has been thoroughly checked for damage. If concealed damage is found later, contact the carrier immediately to file a claim.

What to do if equipment arrives damaged:

VISIBLE LOSS OR DAMAGE - Be certain to note this on the freight or express receipt and have it signed by the delivery person.

FILE CLAIM FOR DAMAGES IMMEDIATELY - Regardless of extent of damage. This claim must be filed with the carrier.

CONCEALED LOSS OR DAMAGE - If damage is noticed when equipment is unpacked, notify the freight company immediately, and file a “concealed damage claim”. This MUST be done immediately. Be sure to retain the shipping container for inspection.

Keating does not assume responsibility for Loss OR Damage incurred in transit. Keating’s sole responsibility in such cases will be to provide support in determining the extent of the parts, labor, and cost thereof needed to return said equipment to new condition.

INSTALLATION

Installation must conform with local codes or, in absence of local codes, with the current National Fuel Gas Code Z223.1/NFPA 54(latest edition), Natural Gas Installation CAN/CGA - B149.1 or Propane Installation Code CAN/CGA-B149.2. When pressure testing at test pressures less than or equal to 1/2 psig (3.45 KPA), fryer must be isolated from gas supply piping. When pressure testing at test pressures above 1/2 psig (3.45 KPA), fryer must be disconnected from gas supply piping system.

Counter model and floor model fryers must be restrained to prevent tipping when installed in order to avoid splashing, spilling, etc. of hot liquid. The restraining method may be a manner of installation or by separate means.

LEVELING

The fryer will operate at its highest efficiency when properly leveled. Place a level on fryer vessel from side to side. For fryers on legs, the bottom foot of the leg is adjustable. Turn clockwise to decrease height or counter clockwise to increase height until level. For fryers on casters, the casters are adjustable by loosening the jam nut and turning the caster in or out. When the desired level is reached, tighten the jam nut. Adjustments of more than 3/4" are not recommended on any caster. The same procedure should be followed to level the fryer from front to back.

Figure 2-1

RESTRAINING DEVICES

1.) Adequate means must be provided to limit the movement of the appliance without depending on the connector and the quick-disconnect device or its associated piping to limit the appliance movement.

Fryer must also be restrained to prevent tipping when installed so that hot liquid splashing is avoided.

2.) The restraint means must be attached to the rear of the Keating IFM within 2" of the center line width and approximately 1 5/8" from the bottom of the cabinet back to allow the restraining bolt to be anchored to the cabinet back between the cabinet bottom and inner liner.

IF DISCONNECTION OF THE RESTRAINT IS NECESSARY, IT MUST BE RECONNECTED WHEN THE KEATING IFM IS RETURNED TO ITS ORIGINALLY INSTALLED POSITION.

NOTICE:

WHEN THIS APPLIANCE IS INSTALLED WITH CASTERS, IT MUST BE INSTALLED WITH CASTERS SUPPLIED, A CONNECTOR COMPLYING WITH EITHER ANSI Z21.69 OR CAN/CGA - 6.16 AND A QUICK-DISCONNECT DEVICE COMPLYING WITH EITHER ANSI Z21.41 OR CAN1- 6.9. IT MUST ALSO BE INSTALLED WITH RESTRAINING MEANS TO GUARD AGAINST TRANSMISSION OF STRAIN TO THE CONNECTOR, AS SPECIFIED IN THE APPLIANCE MANUFACTURER’S INSTRUCTIONS.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Read and Save this Manual for Future Reference ContentsSeries 2006 Fryer Manual Post this Label in a Prominent Location on Your Unit Introduction Clearances Installation InstallationDamage During Shipment LevelingElectrical Connection GAS Leak TestingGAS Pressure AT Manifold OperatingMaximum Incoming GAS Pressure See FigureShut Down Digital Timer Resetting to Minutes Seconds StepCooking Pause Feature Digital Timer ProgrammingCanceling a Cycle Cleaning and BOIL-OUTClose drain valve Warranty Repairs MaintenancePreventive Maintenance Qualified Service PERService Diagnosis ServiceGas Pressure Air FlowSELF-HELP Guide Common Problems Probable Cause Solutions Follow SequentiallyProblem Probable Cause Solution Troubleshooting ChartBreaker tripped Problem Probable Cause Solution Ordering Parts Parts ListDrain Valve Pull Rod Assembly Incredible Frying Machine GAS Fryer Rear Drain Model Corresponds with parts list on030862 Blower 053726 Incredible Frying Machine GAS Fryer Front Drain Model See pages 23-25 for Control Panel Parts ListInsulation High Limit Thermostat Burner Assembly seeDescription QTY Part Number IFM Control Panel Parts List with Timers Model IFM Control Panel Parts List Model 2006 CPU Located on Rear Drain Units only Description QTY Part Number 166 16 Burner Replacement KIT Description QTY Wiring Diagrams IFM 120V Connection Diagram no TIMERS, Front Drain Model Control Panel Insert Control Panel Back IFM Model 2006 Front Drain Without Lighted Rocker Switch IFM Model 2006 with Safe and Easy Filter IFM Model 2006 CPU Basket Lift Front Drain Page Page Page Page Effective 5/2006 Effective 5/2006 Warranty Keating Limited Warranty Card Service Information

2006 specifications

Keating of Chicago 2006 is a significant entry in the world of high-performance sports cars, designed to offer an exhilarating driving experience while emphasizing speed, technology, and innovative engineering. Developed by Keating Sports Cars, a British automotive manufacturer known for its dedication to performance and craftsmanship, the 2006 model showcases the brand’s ethos of creating lightweight and powerful vehicles.

One of the standout features of the Keating of Chicago is its striking design, which blends aerodynamic efficiency with aesthetic appeal. The car boasts a low profile and sleek lines that not only catch the eye but also facilitate optimal airflow, reducing drag during high-speed maneuvers. Available in various striking colors, the exterior encapsulates the essence of a true sports car, conveying both aggression and elegance.

At the heart of the Keating of Chicago lies a formidable powertrain. The car is typically equipped with an advanced V8 engine, which can produce over 500 horsepower, ensuring thrilling acceleration and top speeds. This engine is paired with an efficient transmission system, providing seamless gear shifts and enhancing driving pleasure. The lightweight chassis contributes to the car’s impressive power-to-weight ratio, allowing it to leap from 0 to 60 mph in just a few seconds.

In terms of technology, the Keating of Chicago is well-equipped with modern conveniences and enhancements aimed at improving both performance and driver experience. Features such as advanced suspension systems, performance brakes, and traction control systems ensure that drivers experience unparalleled handling and stability on various terrains. The integration of digital dashboards provides essential information at a glance, allowing drivers to monitor vital metrics while maintaining focus on the road ahead.

The interior of the Keating of Chicago is designed with driver comfort in mind, offering a minimalist yet functional layout that prioritizes ergonomics and user experience. High-quality materials and bespoke options allow for customization, ensuring that each car is as unique as its owner. With comfortable seating and an intuitive control system, the driving experience is both engaging and enjoyable.

Overall, Keating of Chicago 2006 serves as a testament to the manufacturer's commitment to performance, technology, and style. With its potent engine, aerodynamic design, and cutting-edge features, it continues to be a desirable choice for enthusiast drivers seeking a unique blend of performance and luxury in the world of sports cars.
Top Page Image Contents