Miele DA 249-4 installation instructions Changing the light bulbs

Page 23

Cleaning and Care

Changing the light bulbs

Before changing the light bulbs, disconnect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker.

When in use halogen bulbs become extremely hot, and they can burn your hands. Do not attempt to change the bulbs until they have had sufficient time to cool down.

Do not touch the bulb surface. Fingerprints or body oils deposited on the bulb will decrease the life of the bulb. Please follow the bulb manufacturer’s instructions.

^Remove the decor cover, see "Cleaning and Care / Removing the decor cover".

^Pull the old bulb out of its socket and replace it with a new one of the same type. Be careful not to drop the bulb on the cooktop.

23

Image 23
Contents Operating and Installation Instructions Ventilation System Page Contents Important Safety Instructions Use Only if Evacuate and Call the Fire DepartmentTo reduce the risk of fire only use metal ductwork InstallationGuide to the hood Chimney Canopy Overhead lighting Active Charcoal Filter On/Off button Fan power selectionDelayed Shut Down Chimney extension Recirculation ventAir extraction Recirculation modeFunctional description Operation Selecting the power levelAutomatically switching back the Intensive power level Intensive settingFan performance Turning off the fan Automatic Safety Shut OffDimming the lighting Turning the lighting on/offCharcoal filters Filter timersChecking the filter timers Grease filterReprogramming the grease filter timer Reprogramming the timersReprogramming the charcoal filter timer Stainless steel colored controls Cleaning and CareCleaning the casing Stainless steelRemoving the grease filter Grease filterRemoving the decor cover Inserting the decor cover Cleaning the grease filters Inserting the grease filter Active charcoal filters Cleaning and Care Changing the light bulbs MieleCare After Sales ServiceRepairs Installation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Installation accessories Screw cover Reducing collarAllen wrench Plywood backing To install a plywood backingThis Appliance Must be Grounded Electrical dataAppliance dimensions Standard unit height H Distance between cooktop and hood SDismantling InstallationInstallation instructions Protective filmAir extraction Condensate trap Page Page Page Alteration rights reserved