Miele DA 249-4 installation instructions Plywood backing, To install a plywood backing

Page 30

Plywood backing

The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. 1/2" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, proceed to the included installation sheet.)

To install a plywood backing

^Determine and mark the location of the retaining plate for the canopy as outlined on the installation sheet.

^Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of the retaining plate.

^Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

^Mark a vertical cutting line along the center of each stud.

Be careful not to damage any wiring or plumbing that may be located behind the wall. Make sure that the power supply to the area where this installation is being performed has been turned off at the breaker panel before cutting into the wall.

^Remove the drywall between the cutting lines and replace it with

plywood of a matching thickness (min. 1/2" (13 mm) thick). Tape the joints and refinish the wall.

^Proceed to the included installation sheet to complete the installation.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating and Installation Instructions Ventilation System Page Contents Important Safety Instructions Use Evacuate and Call the Fire Department Only ifInstallation To reduce the risk of fire only use metal ductworkGuide to the hood Chimney extension Recirculation vent On/Off button Fan power selectionDelayed Shut Down Chimney Canopy Overhead lighting Active Charcoal FilterRecirculation mode Functional descriptionAir extraction Intensive setting Selecting the power levelAutomatically switching back the Intensive power level OperationFan performance Automatic Safety Shut Off Turning off the fanTurning the lighting on/off Dimming the lightingGrease filter Filter timersChecking the filter timers Charcoal filtersReprogramming the timers Reprogramming the grease filter timerReprogramming the charcoal filter timer Stainless steel Cleaning and CareCleaning the casing Stainless steel colored controlsGrease filter Removing the decor coverRemoving the grease filter Cleaning the grease filters Inserting the grease filterInserting the decor cover Active charcoal filters Cleaning and Care Changing the light bulbs After Sales Service RepairsMieleCare Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories Reducing collar Allen wrenchScrew cover To install a plywood backing Plywood backingElectrical data This Appliance Must be GroundedAppliance dimensions Distance between cooktop and hood S Standard unit height HProtective film InstallationInstallation instructions DismantlingAir extraction Condensate trap Page Page Page Alteration rights reserved

DA 249-4 specifications

The Miele DA 249-4 is an elegant and powerful range hood designed to enhance your kitchen experience while maintaining a stylish aesthetic. Known for its exceptional performance and thoughtful design, this hood is a popular choice among both professional chefs and home cooks alike.

One of the main features of the Miele DA 249-4 is its powerful extraction capabilities. With a maximum extraction rate of up to 500 cubic meters per hour, this range hood efficiently removes smoke, steam, and odors from your kitchen, ensuring a clean and fresh atmosphere. The hood offers multiple speed settings, allowing users to adjust the fan speed according to their cooking needs. From light frying to heavy sautéing, the Miele DA 249-4 effectively adapts to various cooking scenarios.

This range hood employs advanced technologies to enhance its functionality. One notable feature is its Efficient Con@ctivity function, which connects the range hood with compatible Miele cooktops. This technology allows the hood to automatically adjust its extraction power based on the intensity of the cooking activity, thereby optimizing performance while minimizing energy consumption. This integration not only simplifies use but also ensures that the kitchen remains comfortable and well-ventilated.

The Miele DA 249-4 is designed with user convenience in mind. The hood is equipped with easy-to-use controls, making it simple to operate even when your hands are busy with cooking. Additionally, it features a clear and bright LED lighting system that illuminates your cooking area effectively, providing you with excellent visibility while preparing meals.

Another characteristic that sets the Miele DA 249-4 apart is its easy maintenance. The metallic grease filters are removable and dishwasher-safe, allowing for quick cleaning to ensure optimal airflow and performance. The hood also employs an effective odor-reduction system, which helps to maintain a pleasant cooking environment.

Aesthetically, the Miele DA 249-4 boasts a sleek and modern design that complements any kitchen decor. Its stainless steel finish adds a touch of elegance, while its minimalist lines ensure it does not overpower the space.

In summary, the Miele DA 249-4 range hood combines powerful extraction performance, smart technology, and user-friendly features in a stylish package. Its ability to enhance kitchen efficiency and maintain a clean environment makes it a standout appliance for any culinary enthusiast.
Top Page Image Contents