Electrical data
All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer can not be held responsible for unauthorized work.
Ensure that power to the appliance is OFF while installation or repair work is performed.
Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filter), match the household electrical supply before installing the hood.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department.
U
V
WARNING:
THIS APPLIANCE MUST BE GROUNDED
Important
The hood comes equippped with a 5 ft (1.5 m) power cord with a NEMA
120 VAC, 60 Hz, 15 A power outlet.
Maximum load . . . . . . . . . . . . . . 390 W Lighting . . . . . . . . . . . . . . . . . . 2 x 20 W Voltage . . . . . . . . . . . . . . . . . . . . . 120 V Frequency . . . . . . . . . . . . . . . . . . 60 Hz Circuit rating. . . . . . . . . . . . . . . . . . 15 A
31