Operation
Reprogramming the charcoal filter timer
The active charcoal filter can only be used in recirculation mode and can not be used to exhaust fumes.
The charcoal filter timer is not not pre- set.
Before using the hood in recirculation mode, the charcoal filter timer must be programmed.
^Turn off the fan using the On/Off but- ton.
^Press the Delayed Shut Down and charcoal filter buttons at the same time.
The indicator for the charcoal filter and one of the _indicators will flash.
The lit indicator shows the programmed time:
1st indicator from the left | = | 20 hours |
2nd indicator from the left | = | 30 hours |
3rd indicator from the left | = | 40 hours |
4th indicator from the left | = | 50 hours |
^Use the $or &button to select the desired time.
^Store the selection by pressing the charcoal filter button.
If the procedure is not stored within 4 minutes of programming, the hood will automatically default to the "old" data.
16