Cleaning and Care
Active charcoal filter
In recirculation mode an active char- coal filter must be used in addition to the grease filters. The charcoal filter is designed to absorb cooking odors.
The active charcoal filter will be placed in the canopy above the grease filters.
Replacement active charcoal filters (part # 03 284 680) can be ordered from the Miele Technical Service Department.
USA
CDN
^The grease filters must be removed to access the active charcoal filter. See "Cleaning and Care".
^Two support angles must be installed (see Installation manual to support the charcoal filter.)
The active charcoal filter comes boxed with 2 filters.
For best results, tightly seal the bag containing the remaining filter.
^ Insert the charcoal filter. |
Before using:
^Program the charcoal filter timer, see "Operation/Reprogramming the char- coal filter timer".
Replace the active charcoal filter when the charcoal filter indicator lights. Re- place the filter at least every 6 months or when it no longer absorbs odors effi- ciently.
^After replacing the charcoal filter, press and hold the charcoal filter but- ton for about 3 seconds to reset the charcoal filter timer.
The indicator light will go out.
^If the charcoal filter is replaced be- fore the timer has reached its maxi- mum, the charcoal filter button should be pressed for 6 seconds to reset the counter to zero.
19