Installation accessories
a2 recirculation vents (recirculation mode only)
b2 protective shields
prevent scratches to the chimney dur- ing installation.
c1 diverter (recirculation mode only)
d1 flex hose for connecting the di- verter to the exhaust connection.
e2 hose clips for securing the ducting.
f1 reducing collar
for use with 5" (125 mm) exhaust ducting.
g1
hUpper retaining plate secures the chimney extension.
iMiddle retaining plate for addi- tional stability of the chimney.
jLower retaining plate secures the canopy and motor assembly.
k2 support angles to secure the active charcoal filter in recirculation mode.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy.
(S8 wall anchors included in the pack- aging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the motor assembly.
2 screws 3.9 x 7.5 mm for securing the chimney.
1 allen wrench
for adjusting the unit height
Caution: During the installation pro- cess, please be careful of sharp edges that can cause harm.
1 lever for dismantling the chimney
Installation instruction sheet
27