Miele DA 230-3 installation instructions Reprogramming the grease filter timer

Page 13

Operation

Reprogramming the grease filter timer

The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours.

A time of 20 hours should be pro- grammed in kitchens with frequent pan or deep frying.

A time of 20 hours should also be programmed if the kitchen is only used occasionally. Otherwise grease which has accumulated over a long period of time will harden on the fil- ters making cleaning more difficult.

^Press the On/Off button to turn off the fan.

^Press the Delayed Shut Down and grease filter buttons at the same time.

The indicator for the grease filter and one of the _indicators will flash.

The lit _indicator shows the pro- grammed time:

1st indicator from the left

= 20 hours

2nd indicator from the left

= 30 hours

3rd indicator from the left

=

40 hours

4th indicator from the left

=

50 hours.

^Use the $or &button to select the desired time.

^Store the selection by pressing the grease filter button.

If the procedure is not stored within 4 minutes of programming, the hood will automatically default to the "old" data.

13

Image 13
Contents Operating and installation instructions Ventilation System Table of Contents Important Safety Instructions Use Be Careful to Prevent Burns To reduce the risk of fire, only use metal ductwork InstallationFunctional description Appliance description Delayed Shut Down On/Off button Fan power level buttonsGrease filter button Intensive setting Selecting the power levelOperation Turning on the fanTurning off the fan Automatic Safety Shut OffTurning the lighting on/off Dimming the lightingChecking the grease filter timer Grease filter timerReprogramming the grease filter timer Cleaning the casing Cleaning and careStainless steel Stainless steel colored controlsGrease filters Changing the light bulb After Sales Service Page Installation instructions Table of Contents Disposal of packing material Caring for the environmentDisposal of an old appliance Structural support This Appliance Must be Grounded Electrical dataAppliance dimensions Installation Installation Installation Installation Installation Exhaust ducting and connections Air extractionAir extraction Alteration rights reserved