Cleaning and care
Grease filters
The reusable metal grease filters re- move solid particles from the vented kitchen air (grease, dust, etc).
The grease filters should be cleaned every
A dirty filter is a fire hazard.
^To remove the grease filters press the locking clips in towards the middle of the filter. Holding carefully, lower and remove the filter.
^Clean the filters
-by hand: use a scrub brush in warm water with a mild detergent.
-in a dishwasher: place the filters in the lower basket, making sure that the spray arm is not blocked.
Depending on the detergent, clean- ing the grease filters in a dishwasher may cause permanent discoloration of the filter surface. Performance of the filter will not be affected by this discoloration.
^After cleaning, the filters can be placed on a towel to air dry.
^While the filters are removed, clean any dirt or grease from the filter cas- ing to prevent the risk of fire.
When putting the grease filters back make sure that the locking clips are vis- ible facing down towards the cooking surface.
If the filters are incorrectly installed, in- sert a small screwdriver into the slit along its edge to disengage it from the casing.
^After returning the grease filters, press the grease filter button for
3 seconds to reset the timer. The indi- cator light will go out.
^If the grease filters are cleaned be- fore the timer has reached its maxi- mum, the grease filter button should be pressed for 6 seconds to reset the counter to zero.
15