Panasonic TH-L32X50M Sound, How to Use the Menu Functions, Equaliser, Balance, Headphone Volume

How to Use the Menu Functions

Menu

Sound

Item	Adjustments / Configurations (alternatives)
	Adjust the frequency level to suit your favourite sound quality
	●This function is available when [Mode] is set to [User].
	●Select the frequency band with the left / right cursor button and change the
	frequency level with the up / down cursor button.
Equaliser	●If you want to enhance the bass sound, raise the level of the lower frequency.
	If you want to enhance the treble sound, raise the level of the higher
	frequency.
	●To reset the levels of each frequency to the default settings, select [Reset to
	Defaults] using the left / right cursor button, and then press the OK button.
Balance	Adjusts the volume level of the right and left speakers
Headphone Volume	Adjusts the volume of the headphones
Surround	Surround sound settings
	[V-Audio]:Provides a dynamic enhancer of width to simulate improved spatial
• Off
	effects
• V-Audio
	●Switching is also possible by the Surround button on the remote control (p. 9).
Volume Control (VAO)	Select to adjust the volume of the audio output
	[TV]: Only the volume of TV speakers is adjustable.
• TV
	[Audio Out (TV Off)]: Only the volume of Audio Out is adjustable and mute the
• Audio Out (TV Off)
	TV speaker’s volume.
• TV and Audio Out
	[TV and Audio Out]: The volume of TV speakers and Audio Out is adjustable.
Auto Gain Control	Adjusts the current volume level if it is extremely different from the previous
• Off
	viewed channel or input mode
• On
Volume Correction	Adjust the volume of individual channel or input mode
Speaker Distance to	Adjust the low frequency sound
	●If the space between the back of TV and wall is over 30 cm, [Over 30cm] is
Wall
	recommended.
• Over 30cm
	●If the space between the back of TV and wall is within 30 cm, [Up to 30cm] is
• Up to 30cm
	recommended.
MPX	Select multiplex sound mode (if available)
• Stereo
	●[Stereo]: Use this normally
• Mono
	●[Mono]: When stereo signal cannot be received
• M1
	●[M1] / [M2]: Available while mono signal is transmitted
• M2
	SPDIF: A standard audio transfer file format
	Selects the initial setting for digital audio output signal from HDMI2 terminal
SPDIF Selection	[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and MPEG
• Auto	are output as PCM.
• PCM	[PCM]: Digital output signal is fixed to PCM.
	●Video mode (p. 41) or Network video contents (p. 52)
	●Amplifier with ARC (Audio Return Channel) only
HDMI1 / 2 / 3 Input	Select to fit the input signal (p. 63)
	[Digital]: HDMI cable connection
• Digital
	[Analogue]: HDMI-DVI adaptor cable connection
• Analogue
	●HDMI input mode only
Reset to Defaults	Press the OK button to reset settings of the present [Mode], [Balance],
	[Headphone Volume] and [Surround] in the Sound Menu to the default

M

S t

28

TH-L32X50M_EN.indd 28

2/16/2012 5:21:40 PM