Indicator / Control panel
B
Identifying Controls
1Function select
●[Volume] / [Backlight] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Tuning] ∗ [Music] or [Speech] mode in the Sound Menu
(p. 27)
2Channel Up / Down, Value change (when using the F button), Switching the TV On (press either button for about 1 second when in Standby mode)
3Changes the input mode
4Mains power On / Off switch
●Use to switch the mains power.
If you turned the TV off during Standby mode by the remote control last time, the TV will power on in Standby mode when you turn the TV on with Mains power On / Off switch.
When pressing the control panel button (1 - 4), the control panel guide appears on the right side of the screen for
Using the On Screen Displays - Operation guide
|
|
| 1 |
|
|
| 2 |
|
|
| 3 |
5 | 6 | 7 | 4 |
|
Rear side of the TV
5Remote control signal receiver
●Do not place any objects between the TV remote control signal receiver and remote control.
6C.A.T.S. (Contrast Automatic Tracking System) sensor
●Senses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On].
(p. 26)
7Power LED
●Red : Standby
Green : On
●The LED blinks when the TV receives a command from the remote control.
Ex Ple
T
Many features available on this TV can be accessed via the On Screen Display menu.
■Operation guide
Operation guide will help you to operate by using the remote control.
Example: [Sound Menu]
Sound Menu | 1/2 | |||||
Mode | Music | |||||
|
|
|
| |||
Bass |
| 0 | ||||
|
|
|
| |||
Treble |
| 0 | ||||
|
|
|
| |||
Balance |
| 0 | ||||
|
|
|
| |||
Headphone Volume |
|
| 20 | |||
|
|
|
| |||
Surround | Off | |||||
|
|
|
| |||
Auto Gain Control | Off | |||||
|
|
| ||||
Volume Correction |
| 0 | ||||
|
|
|
|
|
|
|
Speaker Distance to Wall | Over 30cm | |||||
Select |
| Page up | ||||
|
|
| EXIT |
| ||
|
|
| Change |
| Page down | |
|
|
|
| |||
|
|
| RETURN |
| ||
|
|
|
|
|
| |
Operation guide
■How to use remote control
MENU | Open the main menu |
|
Move the cursor / select from a range of options / select the menu item (up and down only) / adjust levels (left and right only)
Access the menu / store settings after adjustments have been made or options have been set
RETURN
Return to the previous menu
EXIT | Exit the menu system and return to the normal |
| viewing screen |
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●No signal is received and no operation is performed for 30 minutes in Analogue TV mode.
●[Off Timer] is active in the Setup Menu. (p. 17)
●No operation is performed for the period selected in [Auto Standby] (p. 30).
10
2/16/2012 5:21:28 PM
