Recommendations and Suggestions

INSTALLATION

•The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.

•The minimum safety distance between the cooker top and the extrac- tor hood is 650 mm.

•Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.

•For Class I appliances, check that the domestic power supply guaran- tees adequate earthing.

Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible.

•Do not connect the extractor hood to exhaust ducts carrying combus- tion fumes (boilers, fireplaces, etc.).

•If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. The kitchen must have an opening communicating directly with the open air in order to guarantee the entry of clean air.

USE

•The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.

•Never use the hood for purposes other than for which it has ben de- signed.

•Never leave high naked flames under the hood when it is in operation.

•Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides.

•Deep fat fryers must be continuously monitored during use: over- heated oil can burst into flames.

•The hood should not be used by children or persons not instructed in its correct use.

MAINTENANCE

•Switch off or unplug the appliance from the mains supply before carry- ing out any maintenance work.

•Clean and/or replace the Filters after the specified time period.

•Clean the hood using a damp cloth and a neutral liquid detergent.

650 mm min.

EN		1
EN		13

FTC 922, FTC 622 specifications

Franke Consumer Products is renowned for its innovative kitchen and bathroom solutions, and among its impressive lineup are the FTC 622 and FTC 922 models. These kitchen taps are designed to enhance functionality while adding a sleek and modern aesthetic to any culinary space.

The FTC 622 model is characterized by its minimalist design, which is perfect for contemporary kitchens. It features a high-arc spout that provides ample clearance for large pots and pans, making it an ideal choice for busy home cooks. This model incorporates a dual-function spray head that allows users to switch between a steady stream and a powerful spray with just a button push. This versatility makes it easy to fill pots or rinse off dishes effortlessly. Additionally, the FTC 622 is equipped with a ceramic disc cartridge which ensures a smooth operation and a long-lasting leak-free experience.

On the other hand, the FTC 922 takes innovation a step further with its integrated sensor technology. This touchless tap allows users to activate water flow with a simple wave of the hand, promoting a hygienic experience while reducing water wastage. The FTC 922 also features a pull-down spray head that delivers the same dual-functionality as the FTC 622, offering both stream and spray modes to accommodate various kitchen tasks. It is equipped with a durable, easy-to-clean finish that resists fingerprints and water spots, contributing to its low-maintenance appeal.

Both the FTC 622 and FTC 922 employ Franke's advanced water-saving technologies, ensuring that users can enjoy high performance without excessive water consumption. The EcoWater technology employed in these taps helps to conserve water while still delivering optimal pressure and flow, making them an environmentally friendly choice.

In terms of installation, both models offer a straightforward process that can accommodate various sink configurations. Their robust construction guarantees durability, ensuring that these taps will withstand the rigors of daily use.

In conclusion, the Franke FTC 622 and FTC 922 models offer advanced features and technologies that enhance the kitchen experience. With their stylish designs, practicality, and focus on sustainability, these taps are perfect for modern homeowners looking to elevate their kitchen functionality while enjoying the benefits of innovative plumbing solutions. Whether one opts for the straightforward elegance of the FTC 622 or the cutting-edge technology of the FTC 922, both options reflect Franke’s commitment to quality and design excellence.