Installation

Drilling the Support surface and Fitting the Hood

•The Hood can be fitted directly on the lower surface of the Wall Units (650 mm min. above the Cooker Top) using the snap- on Side Supports.

•Make an opening on the lower surface of the Wall Unit, as indicated. (fig.1)

•Choose the correct flange measure basing on the air outlet diameter and insert it to the upper air outlet opening. (fig.2)

•Screw the closing profile 20 onto the rear part of the hood, using the screws 12f (2.9 x 9.5) provided. (fig.3)

•Open the sliding suction panel.

•Remove the metal grease filters one by one by turning the hooks provided.

•Close the sliding suction panel again.

•Insert the Hood until the snap-on side sup- ports click into place. (fig.4)

•Open the sliding suction panel.

•Lock in position by tightening the screws Vf from underneath the Hood. (fig.4)

•If necessary, adjust the whole filter holder unit and proceed as follows:

•Loosen the four adjustment screws Vr and close the sliding panel again. (fig.5)

•Move the entire filter holder unit until it is properly aligned with the wall unit. (fig.6)

•Keeping the hood canopy still, remove the sliding panel and lock the adjustment screws again. (fig.5)

•The hood can now be fastened to the wall unit using the four screws 12a (3.5 x 16) provided. (fig.7)

	10
162	2

523

12a

•Replace the metal grease filters.

•Close the sliding suction panel again.

EN		1
EN		15

FTC 922, FTC 622 specifications

Franke Consumer Products is renowned for its innovative kitchen and bathroom solutions, and among its impressive lineup are the FTC 622 and FTC 922 models. These kitchen taps are designed to enhance functionality while adding a sleek and modern aesthetic to any culinary space.

The FTC 622 model is characterized by its minimalist design, which is perfect for contemporary kitchens. It features a high-arc spout that provides ample clearance for large pots and pans, making it an ideal choice for busy home cooks. This model incorporates a dual-function spray head that allows users to switch between a steady stream and a powerful spray with just a button push. This versatility makes it easy to fill pots or rinse off dishes effortlessly. Additionally, the FTC 622 is equipped with a ceramic disc cartridge which ensures a smooth operation and a long-lasting leak-free experience.

On the other hand, the FTC 922 takes innovation a step further with its integrated sensor technology. This touchless tap allows users to activate water flow with a simple wave of the hand, promoting a hygienic experience while reducing water wastage. The FTC 922 also features a pull-down spray head that delivers the same dual-functionality as the FTC 622, offering both stream and spray modes to accommodate various kitchen tasks. It is equipped with a durable, easy-to-clean finish that resists fingerprints and water spots, contributing to its low-maintenance appeal.

Both the FTC 622 and FTC 922 employ Franke's advanced water-saving technologies, ensuring that users can enjoy high performance without excessive water consumption. The EcoWater technology employed in these taps helps to conserve water while still delivering optimal pressure and flow, making them an environmentally friendly choice.

In terms of installation, both models offer a straightforward process that can accommodate various sink configurations. Their robust construction guarantees durability, ensuring that these taps will withstand the rigors of daily use.

In conclusion, the Franke FTC 622 and FTC 922 models offer advanced features and technologies that enhance the kitchen experience. With their stylish designs, practicality, and focus on sustainability, these taps are perfect for modern homeowners looking to elevate their kitchen functionality while enjoying the benefits of innovative plumbing solutions. Whether one opts for the straightforward elegance of the FTC 622 or the cutting-edge technology of the FTC 922, both options reflect Franke’s commitment to quality and design excellence.