Using the automatic programs
^Turn the power selector to . The symbol for the first available automatic program will appear in the display: The microwave power symbol h and Ad: I light up, and the defrost symbol flashes.
^Turn the selector knob until the desired automatic program appears in the display:
e.g. the Ad 5 program for defrosting chicken.
^Touch OK.
Either "g" or "lb" flashes in the display as a prompt to enter the weight, and the symbol for microwave power h lights up, as well as and/or , depending on which group the selected automatic program belongs to.
The minimum weight for the selected automatic program also continues to show in the display.
^Use the selector knob to change the weight.
^Touch OK.
The time corresponding to the weight entered appears in the display, and the start symbol flashes.
^Touch the "Start" button.
The time begins to count down and h lights up, as well as and/or .
A signal will sound halfway through the cooking time.
^Interrupt the program to turn or stir the food, and then resume the program.
If necessary, the programmed times can be extended by a few minutes during operation by touching the "Start" button repeatedly until the desired time shows in the display. For all programs, it is only possible to extend the time by a few minutes.
A signal will sound when the cooking program is complete.
The lighting in the oven interior goes out.
34