Before using for the first time
^Press the “Start” button. The “Start” indicator lights.
^Turn the program selector to “Stop”.
^Turn off the dishwasher with the “On/Off” button.
The water hardness level is now stored in the program memory.
Setting the water hardness level selector in the wash cabinet
The water hardness level selector in the wash cabinet must be set according to the following table.
Selecting the correct setting will help minimize the effects of dishwashing on glass surfaces. Too high a setting will lead to poor cleaning results and an in- crease in water spots left on dishes and cutlery.
^Use a screwdriver to take the cover off the water hardness level selector in the wash cabinet.
^Use a coin or screwdriver to adjust the water hardness level selector in the wash cabinet. There is a click as each setting is reached.
gr/gal | ppm | Selector Setting | ||
|
|
|
|
|
1- 7 | 20 | - | 130 | 3 |
140 | - | 180 | 2 | |
200 | - | 250 | 1 | |
270 | - 1260 | 0 | ||
|
|
|
|
|
The selector setting is preset to “3”.
Example:
The water hardness level is 8 gr/gal. The selector setting is 2 (8 - 10 gr/gal).
^Replace the cover on the water hard- ness level selector.
15