Miele G848 Problem solving, The “End” and “Start”, indicators flash simulta, neously, dishwasher

Problem solving

Problem	Possible cause	Remedy
The “End” and “Start”	A service call may be	– Turn the program se-
indicators flash simulta-	needed.	lector to “Stop”.
neously.		– Turn off the dishwasher
		using the “On/Off” but-
		ton.
		After a few seconds:
		– Turn on the dishwasher
		with the “On/Off” but-
		ton.
		– Turn the program se-
		lector to desired pro-
		gram.
		– Press the “Start” but-
		ton.
		If the indicator lights flash
		again:
		– Call the Miele Techni-
		cal Service Dept.
		Despite the problem the
		dishwasher can still be
		used in all programs but,
		the water will not heat.
Knocking noise in the	The spray arm is hitting	Interrupt the program and
wash cabinet	something in the basket.	rearrange items blocking
		the spray arms.
Rattling from within the	The dishes are moving	Interrupt the program and
dishwasher	around inside the dish-	secure items inside.
	washer.
A whistling noise is	The circulation pump seal	This is not a problem. Try
heard during the pro-	sometimes makes a whis-	other detergents. Contact
gram.	tling noise. This may be	the Miele Technical Ser-
	caused by detergent.	vice Department if the
		noise persistent.

42